Read Sony SAL85F14Z Service Manual online
HELP
SAL85F14Z (Planar 1.4/85) (Planar T
*
85mm F1.4 ZA)
HELP07
Adhesive bond (LOCTITE 460)
Note:
Use the adhesive bond (LOCTITE 460) or an equivalent article.
Do not use what becomes white after drying like quick-drying glue.
Anti-diffusion agent (A-20): J-6082-611-A
Grease (G-85):
J-6082-626-A
1.
Apply the adhesive bond (LOCTITE 460) to the tip of screwed portion of stopper screw and tighten the stopper screw.
2.
Apply the grease (G-85) and the anti-diffusion agent (A-20) to the indicated portions of lens mount.
3.
Combine the pins of preset ring and aperture operate plate unit, install the lens mount rivetting block.
4.
Tighten four screws catercorner shown in figure.
Lens Mount Rivetting Block
Screws
Screws
Preset Ring
Apply the anti-diffusion agent (A-20) (All round)
Apply the grease (G-85) to the hole of coupler
Apply the grease (G-85)
(3 locations of hood fixed tabs)
(3 locations of hood fixed tabs)
Apply the adhesive bond
(LOCTITE 460)
(LOCTITE 460)
Click on the first or last page to see other SAL85F14Z service manuals if exist.