SAL70400G2 - Sony Digital Camera Service Manual (repair manual). Page 8

2-5

SAL70400G2 (4-5.6/70-400 G SSM Ⅱ) (70-400mm F4-5.6 G SSM Ⅱ)

Grease (G-85): J-6082-626-A

1.  Apply the grease to the indicated portion of mount assy.

 

Mount Assy

Mount Assy

Cross section

Inner side

Back side of claw (3 locations) Entrance side

Entrance 
side

Outer side

Entrance side

Entrance side

Apply the grease 
(G-85)

Apply the grease 
(G-85)

Cross section

Adhesive bond (B-10): J-6082-612-A
Grease (G-116): J-6082-628-A

1.  Apply the grease (G-116) to the indicated portion of main spring guide.

 

Main Spring Guide

Apply the grease (G-116)
(Sliding portion of Main Spring 2)

2.  Install the main spring 2 and the main spring guide, and fix them with two screws.
3.  Apply the adhesive bond (B-10) to three indicated locations (heads of two screws, main spring 2, and main spring guide).

 

Main Spring 2

Main Spring Guide

Main Spring Guide

Main Spring 2

Apply the adhesive 
bond (B-10)

Adhesive bond (B-10): J-6082-612-A

1.  Tighten five screws and apply the adhesive bond to the heads of five screws.
2.  After adjusting the aperture diameter, fix the function lever with two screws and apply the adhesive bond (B-10) to the heads of two 

screws.

 

Apply the adhesive 
bond (B-10)

Apply the adhesive 
bond (B-10)

Function Lever