Read Sony SAL70200G Service Manual online
HELP
SAL70200G (2.8/70-200 G) (70-200mm F2.8 G)
HELP14
1.
Install the aperture operate plate holder, facing the burr (by press) side to the 1st lens side.
2.
Usually, use two pieces of aperture blade spacer B (t=0.3mm).
Note:
Use two pieces of aperture blade spacer A (t=0.2mm) only when the defect occurs in the iris dynamic characteristics.
HELP15
1.
Install the zoom rubber ring to the zoom operation ring.
2.
Fold up the 1st lens side of zoom rubber ring.
3.
Affix the SW flexible setting tape not to overlap on the brush cover and tapes.
4.
Peel the protection sheet off the adhesive side of SW flexible setting tape and return the zoom rubber ring to the original position.
Aperture Operate Plate Holder
Use the
Aperture Blade Spacer A (t=0.2mm)
or
Aperture Blade Spacer B (t=0.3mm)
Aperture Blade Spacer A (t=0.2mm)
or
Aperture Blade Spacer B (t=0.3mm)
burr side
1st lens side
Brush cover and tapes
Zoom Operation
Ring
Ring
SW flexible setting tape
(Affix it not to overlap on
the brush cover and tapes)
(Affix it not to overlap on
the brush cover and tapes)
Install the zoom rubber ring and
fold it up as shown in the figure
fold it up as shown in the figure
Click on the first or last page to see other SAL70200G service manuals if exist.