Read Sony SAL70200G Service Manual online
HELP
SAL70200G (2.8/70-200 G) (70-200mm F2.8 G)
HELP17
Anti-diffusion agent (A-20):
J-6082-611-A
Adhesive bond (B-10):
J-6082-612-A
Adhesive bond (B-40):
J-6082-614-A
1.
Apply the adhesive bond (B-40) to the tip of screw portion of zoom stopper pin.
2.
Install two pieces of anti slip rubber.
3.
Apply the anti-diffusion agent (A-20) to all circumferences of indicated portion of zoom connect plate.
4.
Insert two pieces of zoom connect plate in the groove of 4th lens barrel and tighten firmly four screws.
Loosen the screws half turn.
5.
After moving the zoom operation ring little by little, tighten firmly the screws.
Note:
Do not operate the zoom until the zoom stopper pin is installed.
6.
Apply the adhesive bond (B-10) to the indicated portion of zoom connect plate.
After tightening four screws,
loose the screws half turn
loose the screws half turn
Zoom Connect Plate
Zoom Connect
Plate
Plate
Anti-Slip
Rubber
Rubber
Anti-Slip
Rubber
Rubber
Insert in the groove
of 4th lens barrel
of 4th lens barrel
Groove
of 4th lens barrel
of 4th lens barrel
Zoom Stopper Pin
Apply the
anti-diffusion
agent (A-20)
(All around)
anti-diffusion
agent (A-20)
(All around)
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-10)
Zoom Connect Plate
Note:
Do not operate the zoom until
the zoom stopper pin is installed.
Do not operate the zoom until
the zoom stopper pin is installed.
Click on the first or last page to see other SAL70200G service manuals if exist.