Read Sony SAL70200G (serv.man2) Service Manual online
HELP
SAL70200G (2.8/70-200 G) (70-200mm F2.8 G)
HELP24
Adhesive bond (B-40): J-6082-614-A
1.
While drawing out the flexible PWB and harness of stator through the flexible PWB threading hole of front holding tube, install the
front holding tube block.
2.
Apply two drops of adhesive bond (B-40) to the tips of eight screws and fix the front holding tube block with eight screws.
Note:
Tighten four screws diagonally first and then the rest four screws diagonally.
Apply the
adhesive bond (B-40)
adhesive bond (B-40)
Flexible PWB threading hole
of front holding tube
of front holding tube
Flexible PWB threading hole
of front holding tube
of front holding tube
Front Holding Tube Block
Tighten four screws diagonally
Tighten the rest four
screws diagonally
screws diagonally
Flexible PWB and harness of stator
Flexible PWB and harness of stator
Click on the first or last page to see other SAL70200G (serv.man2) service manuals if exist.