Read Sony SAL500F80 Service Manual online
HELP
SAL500F80 (REFLEX 8/500) (500mm F8 Reflex)
HELP11
Adhesive bond (B-40): J-6082-614-A
1.
Select the focus ring linkage pin of a proper diameter against the groove of the focus connect ring from the following table.
2.
Apply the adhesive bond (B-40) to the screw portion of the two focus ring linkage pins, and tighten them to the G1 lens holder.
Distance tube joint pin
Part No.
Description
2-689-211-01
Focus Ring Linkage Pin A (ø4.00)
2-689-212-01
Focus Ring Linkage Pin B (ø4.01)
2-689-213-01
Focus Ring Linkage Pin C (ø4.02)
Focus Ring Linkage Pin
Groove
Focus Joint Tube
Apply the Adhesive Bond (B-40)
Apply the Adhesive Bond (B-40)
Focus Ring Linkage Pin
G1 Lens Holder
Click on the first or last page to see other SAL500F80 service manuals if exist.