Read Sony SAL500F80 Service Manual online
HELP
SAL500F80 (REFLEX 8/500) (500mm F8 Reflex)
HELP09
Anti-diffusion agent (A-20): J-6082-611-A
Grease (G-10):
J-6082-618-A
Apply the anti-diffusion agent (A-20) and the grease (G-10) to the instruction portions of the focus connect ring as shown in the figure.
HELP10
Adhesive bond (B-10): J-6082-612-A
1.
Install the G1+G3+G7 assy to the helicoid unit, and fix it with the three G1 hold pin and G1 adjustment screws.
Note:
Stop the tightening of the G1 adjustment screw when the tip of the G1 adjustment screw comes in contact with the
G1+G3+G7 assy.
2.
After attaching the mount block tentatively.
3.
Perform the “4-2. Optical Axis Check/Adjustment”, apply the adhesive bond (B-10) to the three G1 adjustment screws.
Apply the Anti-Diffusion Agent
(A-20) (All circumferences)
(A-20) (All circumferences)
Apply the Grease (G-10) (U groove portion, two areas)
Helicoid Unit
G1 Adjustment Screw
(Three areas)
(Three areas)
G1 Hold Pin
(Three areas)
(Three areas)
Apply the Adhesive Bond (B-10)
Mount Block
Apply the Adhesive Bond (B-10)
Apply the Adhesive Bond (B-10)
Click on the first or last page to see other SAL500F80 service manuals if exist.