Read Sony SAL35F14G Service Manual online
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP15
Adhesive bond (B-10):
J-6082-612-A
Grease (G-35):
J-6082-621-A
Anti-diffusion agent (A-20):
J-6082-611-A
Universal wrench:
J-6082-609-A
Chip-A for Universal wrench: J-6082-609-1
Chip-B for Universal wrench: J-6082-609-2
Note:
Select the chip-A or chip-B for usage.
1.
Apply the anti-diffusion agent (A-20) to the indicated portions of cam ring.
2.
Apply the grease (G-35) to the cam ring, cam groove and them contact zone.
3.
Attach the float ring so that the groove of cam ring places the bosses of float ring.
4.
Apply the grease (G-35) to the indicated portions of cam ring holder.
5.
Use the universal wrench, After tightening the cam ring holder, loosen it about 10 to 15mm from dead end, apply the adhesive bond
(B-10) to indicated portion.
Note:
After apply the adhesive bond (B-10), plese leave it for 6 hours or move. (The mountside is the under.)
6.
Conform the movement of the cam ring.
Cam Ring
Apply the grease
(G-35)
(G-35)
After confirming the movement,
apply the adhesive bond (B-10) in
width of 5 to 10mm to 2 locations.
apply the adhesive bond (B-10) in
width of 5 to 10mm to 2 locations.
Apply the grease (G-35)
(6 locations of cam groove)
(6 locations of cam groove)
Apply the anti-diffusion agent (A-20)
Apply the anti-diffusion agent (A-20)
Cam Ring Holder
Apply the grease (G-35) to holding
surface sides of cam ring holder.
surface sides of cam ring holder.
Apply the anti-diffusion agent (A-20)
Cam Ring
Cam Ring
Apply the grease (G-35)
Cam Ring Holder
Apply the adhesive bond (B-10)
(circumference of 2 locations,
width of 5 to 10mm)
(circumference of 2 locations,
width of 5 to 10mm)
Fixed Barrel
Apply the grease (G-35)
(6 locations of cam groove)
(6 locations of cam groove)
Apply the grease (G-35)
Fixed Barrel
Groove
Boss of float ring
Focus Operating Ring
Ver 1.2 2007.06
Click on the first or last page to see other SAL35F14G service manuals if exist.