Read Sony SAL2470Z2 Service Manual online
4-3
SAL2470Z2 (Vario-Sonnar 2.8/24-70 ZA SSM II) (Vario-Sonnar T* 24-70mm F2.8 ZA SSM II)
• Half Completion Inspection
1. It decomposes the set from the mount side, and the state has been removed until the Zoom Barrel.
Note:
Such as 1st Lens ASSY, Mirror Tube Block ASSY, the objective lens side of the parts is removal unnecessary.
Fig.4-1-5
2. The Half Completion JIG is installed on the Cab lens with two screws.
3. Connect, Encoder flexible, MR flexible, and SSM flexible. (It is no need to connect SW flexible board.)
3. Connect, Encoder flexible, MR flexible, and SSM flexible. (It is no need to connect SW flexible board.)
MR Flexible
SW Flexible
Half Completion
JIG
JIG
Encoder Flexible
SSM Flexible
Finished Inspection
JIG
II
Fig.
4-1-6
2. Startup of Lens Adjustment Program (ACSSM-S-VerXXX)
1) Turn on the personal computer and the finished inspection JIG II.
2) Start up ACSSM-S-VerXXX.exe from an arbitrary folder.
Note:
• At the first time using, the followings appear on the screen (Fig. 4-1-7).
1) Turn on the personal computer and the finished inspection JIG II.
2) Start up ACSSM-S-VerXXX.exe from an arbitrary folder.
Note:
• At the first time using, the followings appear on the screen (Fig. 4-1-7).
It is required to ask HQ about the password for the Com/User Characteristic Number and the manufacturer/type name of the personal
computer.
Ex. Com/User Characteristic Number : iYdDZfq9q
computer.
Ex. Com/User Characteristic Number : iYdDZfq9q
Personal Computer : SONY PCV-RZ33P
• It is no need to input password to the computer once registered.
(The screen requires password doesn t appear.)
• If the personal computer or the finished inspection JIG II is changed, the password and the Com/User Characteristic Number are
changed.
Therefore on the startup, the password input is required again.
Therefore on the startup, the password input is required again.
3) Input the password and click [OK [Enter]], the following appears on the screen (Fig. 4-1-8).
Fig. 4-1-7
Fig. 4-1-8
4-1-5. Initial Setting of Lens Adjustment Program (ACSSM-S-VerXXX)
1. Start up ACSSM-S-VerXXX.exe .
Fig.
4-1-9
2. When the Japanese window appears, click the [Set up] button, change the language to English.
Note:
Depending on the initial startup or setting made at the previous startup, the window differs.
3. Set the following contents in the SETUP window.
MODEL
Model to be adjustment in this time
Language
Japanese
State
Final
Table
4-1-1
Click on the first or last page to see other SAL2470Z2 service manuals if exist.