Read Sony SAL20F28 Service Manual online
HELP
SAL20F28 (2.8/20) (20mm F2.8)
HELP03
Adhesive bond (LOCTITE 460) (Note)
Note:
Use adhesive bond (LOCTITE 460) or an equivalent article.
Do not use what becomes white after drying like quick-drying glue.
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-40):
J-6082-614-A
1.
Apply the adhesive bond ((LOCTITE 460) to the back side of the mount index, and attach it to the outer barrel.
2.
Apply the anti-diffusion agent (A-20) to the instruction portions of the outer barrel.
3.
Attach the outer barrel and outer barrel hold plate as shown in the figure. Apply the adhesive bond (B-40) to the three screws and
tighten them as shown in the figure.
Apply the adhesive bond(LOCTITE 460)
Outer Barrel
Apply anti-diffusion agent(A-20)
(All circumference)
(All circumference)
Outer Barrel
Apply the adhesive bond (B-40)(3 areas)
Coupler Bush
Outer Barrel Hold Plate
Notch
Outer Barrel
Mount Index
Outside Barrel
Outer Barrel Plate
Notch the outer barrel
Click on the first or last page to see other SAL20F28 service manuals if exist.