Read Sony SAL20F28 Service Manual online
HELP
SAL20F28 (2.8/20) (20mm F2.8)
HELP08
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-40):
J-6082-614-A
1.
Apply the anti-diffusion agent (A-20) to the instruction portions of the outside barrel.
2.
Install the back adjustment washers.
3.
Attach the outside barrel so that the relationship of the preset ring pin and the hole for axis meet the position as shown in the figure.
4.
Turn the outside barrel clockwise, eliminating play, and tighten four screws.
Note:
After performing “4-4-2 Flange back (f’F) adjustment”, apply the adhesive bond (B-40) to the screwed portions of screws
and tighten screws.
Apply the adhesive bond(B-40)
Apply the adhesive bond(B-40)
Back Adjustment Washer
Apply the anti-diffusion agent(A-20)
(All circumference)
(All circumference)
Outside Barrel
Hole for axis
Preset Ring Pin
Ver 1.2 2007.05
Click on the first or last page to see other SAL20F28 service manuals if exist.