Read Sony SAL20F28 Service Manual online
HELP
SAL20F28 (2.8/20) (20mm F2.8)
HELP02
Adhesive bond (B-10): J-6082-612-A
1.
Affix both ends of focus scale plate with tapes, aligning the end (
∞ side) of focus scale plate with the marking on focus ring.
2.
Attach the focus ring to the outer barrel and align the “center of infinity” of focus scale plate with the guide mark of focus scale
window unit.
Note:
Be sure to turn the focus ring clockwise when aligning.
3.
Tighten the three screws as shown in the figure, and apply the adhesive bond (B-10) to the screw head as shown in the figure.
∞
Distance index
Outer Barrel
Focus Ring
Front Lens Barrel
Apply the adhesive bond(B-10)
Screw
Apply the adhesive bond(B-10)(3 areas)
Focus Ring
Scratch
Focus Scale Plate
Polyester Tape (Black)
10 mm (8 x 40 mm)
10 mm (8 x 40 mm)
Polyester Tape (Black)
10 mm (8 x 40 mm)
10 mm (8 x 40 mm)
Ver 1.2 2007.05
Click on the first or last page to see other SAL20F28 service manuals if exist.