Read Sony SAL18135 Service Manual online
4-1
SAL18135 (3.5-5.6/18-135 SAM) (DT18-135mm F3.5-5.6 SAM)
Note:
After the service repair, perform the adjustments referring to this section.
4-1. PREPARATIONS
4-1-1. List of Service Tools and Equipments
• Variable Transformer (Output voltage: AC 100 V) (Note 3)
• Camera (One of DSLR-A700, SLT-A37/A57/A58/A65/A77/A99)
• Memory Card
• Screen (Art paper)
• Tape Measure
• Plane Mirror (For SLRs)
• Adhesive bond (B-10): J-6082-612-A
• Adhesive bond (B-110): J-6082-617-A
• Lens Adjustment Program (ACSAM-S-VerX.XX.zip)
• Color Calculator 2
• Camera (One of DSLR-A700, SLT-A37/A57/A58/A65/A77/A99)
• Memory Card
• Screen (Art paper)
• Tape Measure
• Plane Mirror (For SLRs)
• Adhesive bond (B-10): J-6082-612-A
• Adhesive bond (B-110): J-6082-617-A
• Lens Adjustment Program (ACSAM-S-VerX.XX.zip)
• Color Calculator 2
Note:
Acquire the Lens Adjustment Program and Color Calculator 2 from the each HQ.
J-1
J-9
J-7
J-2
J-4
J-6
J-5
J-8
J-3
20
30
40
50
60
70
80
90
0
10
J-10
J-11
J-14
Personal computer
(Note 1)
(Note 1)
Luminance box
J-6082-581-A
J-6082-581-A
AE master lens
J-6082-597-A
J-6082-597-A
1000 mm Collimator
110V: J-6082-604-A
240V: J-6082-604-B
(Note 2)
110V: J-6082-604-A
240V: J-6082-604-B
(Note 2)
Lens test projector
J-6082-605-A
(Note 3)
J-6082-605-A
(Note 3)
Flange back tester
J-6082-606-A
J-6082-606-A
A-mount
attachment
J-6082-607-A
attachment
J-6082-607-A
Flange back gauge
(43.50 mm)
J-6082-608-A
(43.50 mm)
J-6082-608-A
Finished
Inspection
JIG
J-6082-710-A
(Note 4)
Inspection
JIG
J-6082-710-A
(Note 4)
M-BOX JIG
J-6082-722-A
(Note 5)
J-6082-722-A
(Note 5)
J-12
J-13
Chip-A for universal
wrench
J-6082-609-1
wrench
J-6082-609-1
Universal
wrench
J-6082-609-A
wrench
J-6082-609-A
Chip-B for universal
wrench
J-6082-609-2
wrench
J-6082-609-2
Chip-C for universal
wrench
J-6082-609-3
wrench
J-6082-609-3
Fig. 4-1-1
Note 1:
Personal Computer (PC)
(Color Calculator 2 installed)
OS: Windows
OS: Windows
Vista/7
MEMORY:
40 M Byte or more recommended
Hard disk free area: 15 M Byte or more recommended
USB terminal:
USB terminal:
Standard equipment
Graphics:
32,000 colors or more recommended VGA monitor
Note 2:
Attach the chart to the 1000 mm collimator as shown in Fig. 4-1-2.
Align the marks
1000 mm collimator
Chart
Fig.
4-1-2
Note 3:
Connect the variable transformer (Output voltage: AC 100 V) to the lens test projector.
Note 4:
For connection of Finished Inspection JIG II, refer to 4-7-2. Connection of Finished Inspection JIG II and Startup of Lens Adjustment Program
(ActuatorCheckerSAM) .
Note 5:
M-Box jig is available in use for Finished Inspection jig II (J-6082-710-A).
4. ADJUSTMENTS
Ver. 1.1 2015.07
Click on the first or last page to see other SAL18135 service manuals if exist.