Read Sony SAL100M28 Service Manual online
4-18
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
3. Pattern Check
Note:
When the NG (Red) indicator of “Position” lights during checking, does not care about it (It is normal performance).
1)
Turn the focus ring (focus cam ring A) slowly from the near end “Focus Pattern : 1” to the infinity end “Focus Pattern : 51” and check
that the value of “Focus Pattern” change from 1 to 51 continuously.
2)
Turn the focus ring (focus cam ring A) slowly from the infinity end “Focus Pattern : 51” to the near end “Focus Pattern : 1” and check
that the value of “Focus Pattern” change from 51 to 1 continuously.
Fig. 4-7-8
3)
Click the
[Exit]
button.
4)
Click the
[End]
button to terminate the lens adjustment program.
5)
Turn the POWER switch of the camera to OFF.
6)
After the pattern check is completed, apply the adhesive bond (B-10) as shown in Fig. 4-7-9.
Fig. 4-7-9
h
h
h
h
h
Apply the adhesive
bond (B-10)
bond (B-10)
Click on the first or last page to see other SAL100M28 service manuals if exist.