Read Sony SAL100M28 Service Manual online
4-12
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
4-4-2. Flange Back (f’F) Adjustment
Equipment
• 1000 mm Collimator
• Flange Back Tester
• A-mount Attachment
Adjusting Method
1)
Perform “4-4-1. Flange Back (f’F) Check”, and check that the checking lens is out of specification.
2)
Set the focus of checking lens to over infinity end.
3)
Turn the focusing knob of the flange back tester until the chart image is the sharpest, confirm the flange back value. (a: Reading
value)
Flange back (f'F) of the checking lens = (Flange back gauge) + (Number of short-pointer revolution) + (Reading of long-pointer)
4)
According to the result in step 3), calculate amount of increase and decrease of the back adjustment washer using the following
formula. (X: Amount of increase and decrease of the back adjustment washer)
X (Amount of increase and decrease of the back adjustment washer) = a (Flange back value (by over infinity end)) - 45.26 mm
Specification
Over infinity end: 45.26
± 0.02 mm
5)
Adjust the back adjustment washer and coupler adjustment washer thickness according to the result in step 4).
Note:
Use the micrometer gauge (or slide gauge) to measure the back adjustment washer and coupler adjustment washer thickness.
If X (Amount of increase and decrease of the back adjustment washer) is a negative value (-):
Decrease the thickness of back adjustment washer and coupler adjustment washer by the value X.
If X (Amount of increase and decrease of the back adjustment washer) is a positive value (+):
Increase the thickness of back adjustment washer and coupler adjustment washer by the value X.
Table 4-4-1
Ver. 1.3 2008.01
The changed portions from
Ver. 1.2 are shown in blue.
Ver. 1.2 are shown in blue.
Back adjustment washer
Parts No.
T (mm)
A
2-685-590-01
0.05
B
2-685-591-01
0.07
C
2-685-592-01
0.1
D
2-685-593-01
0.2
E
2-685-594-01
0.5
Coupler adjustment washer
Parts No.
T (mm)
A
2-685-525-01
0.05
B
2-685-526-01
0.07
C
2-685-527-01
0.1
D
2-685-528-01
0.2
E
2-685-529-01
0.5
Click on the first or last page to see other SAL100M28 service manuals if exist.