Read Sony SAL100M28 Service Manual online
4-16
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
4-7.
BRUSH POSITION CHECK/ADJUSTMENT AND PATTERN CHECK
Note:
If dialog box of error code appears during the checking or adjustment, check the reason of error referring to page 4-19.
4-7-1. Brush Position Check
Equipment
• Personal Computer (PC)
• Camera DSLR-A100
• USB Cord With Connector
• Lens Adjustment Program
Note:
Lens Adjustment Program is downloadable from the ESI homepage.
1. Preparations
1)
Connect the checking lens to the camera.
2)
Start the lens adjustment program “LensAdjustment.exe” referring to “4-1-2. Lens Adjustment Program”.
Fig. 4-7-1
2. Checking Method
1)
Click the
[Connect]
button on the lens adjustment program.
Note:
Click the
[End]
button to disconnect the USB connection, then lens adjustment program will terminate.
Fig. 4-7-2
2)
Check that the “Type” is set to “1”, and click the
[Focus]
button on the lens adjustment program.
3)
Set the focus position to infinity end, then check that the OK (Green) indicator of “Position” lights as shown in Fig. 4-7-3.
Fig. 4-7-3
If the NG (Red) indicator of “Position” lights, perform the “4-7-2. Brush Position Adjustment and Pattern Check”.
Fig. 4-7-4
4)
Click the
[Exit]
button.
5)
Click the
[End]
button to terminate the lens adjustment program.
6)
Turn the POWER switch of the camera to OFF.
Click on the first or last page to see other SAL100M28 service manuals if exist.