Read Sony DSC-W690 (serv.man2) Service Manual online
DSC-W690_L2
1-7
Cam Tube B
Cam Tube B
2 Group Frame
3 Group Assy
Straight Tube Block
Straight Tube
Straight Tube
19. Fully turn the Cam Tube B in the arrow direction.
20. Remove the 2 Group Frame.
21. Remove the Straight Tube Block.
21. Remove the Straight Tube Block.
22. Turn the Straight Tube in the arrow direction to detach it from the Cam Tube B.
White Part
Thinnest Groove
Cam Tube B
Cam Tube B
Lever
Cutout
Straight Tube
Straight Tube
3 Group Assy
Straight Tube Block
2 Group Frame
2 Group Frame
Shaft of 3 Group Assy
Top side view
Installation
1. Align the Lever with the cutout as shown in the figure, and then install the Straight Tube to the Cam Tube B.
Note: Be sure to set the Straight Tube at the correct insertion position.
2. Turn the Straight Tube in the arrow direction to the maximum.
Note: Be sure to set the Straight Tube at the correct insertion position.
2. Turn the Straight Tube in the arrow direction to the maximum.
3. Install the Straight Tube Block aligning the thinnest groove with the white part as shown in the figure, and then turn
the Cam Tube B in the arrow direction to the maximum.
the Cam Tube B in the arrow direction to the maximum.
4. Install the 2 Group Frame at a position where the Shaft of 3 Group Assy is visible through the cutout of the 2 Group Frame.
Click on the first or last page to see other DSC-W690 (serv.man2) service manuals if exist.