Read Sony DSC-W690 (serv.man2) Service Manual online
DSC-W690_L2
3-1E
3. ASSEMBLY
Assembly-1: Precaution During Speaker Installation.
Rib
Speaker
Harness
Harness
Route the speaker harness as shown below.
Assembly-2: Installation Method of Battery Terminal Board.
Fold the notch 3 or 4 times repeatedly to break.
Remove the notch.
Solder the battery terminal board on the SY-328
Board.
* Battery terminal board is attached with
notch for installation.
Board.
* Battery terminal board is attached with
notch for installation.
Remove the battery terminal board by
bending the claw of rock portion.
When assembling the battery terminal board,
replace it with new one because battery
terminal board will be bent.
bending the claw of rock portion.
When assembling the battery terminal board,
replace it with new one because battery
terminal board will be bent.
Notch
Solder Position
(reflow soldering )
(reflow soldering )
Notch
Battery terminal board
Notch
Battery terminal
board
board
SY-328-Board
Assembly-3: Installation Caution of the LCD Cushion (140) and
LCD Window (620).
Apply LCD cushion (140).
And have the Tab of the Release Paper and peel it off.
And have the Tab of the Release Paper and peel it off.
Attach Cabinet (Rear) Assy to set.
Fit LCD Window (620) into the flame of Cabinet (Rear)
Assy and attach it on LCD Cushion (620).
Assy and attach it on LCD Cushion (620).
Release
Paper
Paper
Tab
Align corner of
LCD cushion (140)
with corner of LCD.
LCD cushion (140)
with corner of LCD.
LCD Cushion (140)
LCD
Cabinet (Rear) Assy
Cabinet (Rear) Assy
LCD Window (620)
LCD Cushion (620)
Blow the air before attaching.
Be sure to keep away from dust.
Be sure to keep away from dust.
