Read Sony DSC-W35 (serv.man2) Service Manual online
2-8
DSC-W35_L2
2-2-4. ADHERE THE ORNAMENTAL RING A
Apply an adhesive tape to two recesses on the top surface of the Barrier Assy.
Meeting a “notch” of the Ornamental Ring A with a “projection” of the group-1 frame, push the Ornamental Ring A into the group-1 frame.
*
*
The projection of the spring for preventing static electricity must be tilted.
Put the 60g weight on the Ornamental Ring A so that the Ornamental Ring A does not float up until the adhesive hardens.
Note:
Be careful not to give a shock.
*
After the weight was put, no gap must be present in full circumference between Ornamental Ring A and group-1 frame.
A gap, if present, causes the crackle sound NG.
A gap, if present, causes the crackle sound NG.
*
The weight must push in the Ornamental Ring A only.
If the weight is put on the mold part of the Barrier Assy, the Ornamental Ring A will float up.
If the weight is put on the mold part of the Barrier Assy, the Ornamental Ring A will float up.
Completion after 30 minutes.
Adhesive
tape
tape
Adhesive
tape
tape
Do not put the weight on a black mold part.
Not gap in full circumference.
Click on the first or last page to see other DSC-W35 (serv.man2) service manuals if exist.