DSC-W35 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 13

2-6

DSC-W35_L2

Part Number

Part Name

Quantity

1

2-673-650-01

Ring (A), Ornamental

1

2

2-673-652-01

Barrier Assy

1

3

2-673-651-01

Tapping screw (B1.2

×

4)

2

Torque driver
Soldering iron
Weight about 60g
Adhesive tape (ornamental ring fixed) (2-677-885-01)

The Ornamental Ring A has adhered to the Barrier Assy strongly and accordingly, use a soldering iron to weaken the adhesive force.
Heat two circled portions (1, 2) with the soldering iron.
Heating temperature is about 300ºC.
Beware of a burn since the entire Ornamental Ring becomes hot.
*

As the adhesive force of Ornamental Ring A is considerably large, the forced peeling will damage the group-1 frame.

Insert the tip of tweezers, etc. into a notch of the group-1 frame and prize the ring.
*

Take extreme care so as not to damage the coated surface of the group-1 frame.

In case of difficult peeling, heat the ring again with the soldering iron.
If this re-heating failed, it may be advisable that the ring be peeled while heating the portions 1 

→ 2 in the under figure one by one

sequentially.

*

Discard the removed Ornamental Ring A.

1

2

3

Tip

1

2