Read Sony DSC-W310 (serv.man2) Service Manual online
DSC-W310_ADJ
4-6
Adjustments order
Screen display
Adjustments order
Screen display
4-2-5. Near Focus Adjustment
Note: Perform the Near Focus Adjustment after the Far Focus Adjustment.
1) Be sure to set 50 ± 1 cm distance between the chart and the tip of camera lens.
2) Check that the center of chart meets the center of shot image screen with the zoom
lens at TELE end and WIDE end respectively.
Color temperature = 5000 ± 300K
Be sure not to turn off the power during adjusting.
The adjustment finished normally.
O Near Focus Station Passed
Please Key MENU Enter...
Please Key MENU Enter...
Fig. 4-2-28
The adjustment is complete.
The adjustment is finished abnormally.
X Near Focus NG !
Please ReAdjust Far Focus
Please ReAdjust Far Focus
Fig. 4-2-29
Malfunction of Near Focus ad-
justment.
In case of the Near Focus adjust-
ment is failed, readjust the Far
Focus and try to readjust the Near
Focus.
4-2-6. White Balance Adjustment
The White Balance Adjustment is as follows.
Small pattern box (PTB-1450) setting:
Color temperature = 3150 ± 50K
Luminance: LV12.3 ± 0.2
The adjustment finished normally.
O WB OK
Fig. 4-2-31
The adjustment is complete.
The adjustment is finished abnormally.
X Cap WB NG
Fig. 4-2-32
Malfunction of Cap White Bal-
ance adjustment result.
X Pre WB NG
Fig. 4-2-33
Malfunction of Pre White Balance
adjustment Focus section.
X WB NG
Fig. 4-2-34
Malfunction of White Balance
adjustment zoom section.
Set the unit to the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “PREPARATIONS” (Page 4-2).
Place the camera in front of the Chart. (Fig. 4-2-27)
Press the control button “ B (Key Right)”, then Near Focus Adjustment starts.
Confirm the indication
on the screen.
.
y
ll
a
m
r
o
n
b
a
d
e
h
s
i
n
i
F
.
y
ll
a
m
r
o
n
d
e
h
s
i
n
i
F
In case of the adjustment is finished normally.
The adjustment completion indication appears
on the screen. (Fig. 4-2-28)
Turn off the power to quit the adjustment mode.
In case of the adjustment is finished abnormally.
The following indication appears on the screen.
(Fig. 4-2-29)
In this case, confirm the adjusting environment
and readjust.
In case of the Near Focus adjustment is failed,
readjust the Far Focus adjustment and try to
readjust the Near Focus adjustment.
Set the unit to the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “PREPARATIONS” (Page 4-2).
Place the camera in front of the Small pattern box (PTB-1450). (Fig. 4-2-30)
Press the control button “ z (Key OK)”, then White Balance Adjustment starts.
Confirm the indication
on the screen.
.
y
ll
a
m
r
o
n
b
a
d
e
h
s
i
n
i
F
.
y
ll
a
m
r
o
n
d
e
h
s
i
n
i
F
In case of the adjustment is finished normally.
The adjustment completion indication appears
on the screen. (Fig. 4-2-31)
Turn off the power to quit the adjustment mode.
In case of the adjustment is finished abnormally.
The following indication appears on the screen.
(Fig. 4-2-32 to 4-2-34)
In this case, confirm the adjusting environment
and readjust.
Chart
Camera
Equipments required: Chart
Camera table
Fig. 4-2-27
50 ± 1 cm
Small pattern box
(PTB-1450)
Equipments required: Small pattern box (PTB-1450)
Camera table
Fig. 4-2-30
0.5
to
1.0 cm
Camera
Click on the first or last page to see other DSC-W310 (serv.man2) service manuals if exist.