Read Sony DSC-W310 (serv.man2) Service Manual online
DSC-W310_ADJ
4-2
4. ADJUSTMENTS
4-1. PREPARATIONS
Note:
For the chart, search “J-6082-563-A” in the JIG & Software on ESI homepage, download the PDF file and print out it on the A4 size white paper.
4-1-3. Connecting the Equipments
Connect the equipments as shown below.
4-1-1. Adjustment Items When Replacing CCD block, Lens block and Main board
When replacing these parts, adjust the items indicated by “z” in the following table.
Adjustment
Replaced parts
CCD block
Lens block
Main board
Iris/Mechanical Shutter/Bad Pixel
Adjustment
z
z
z
Zoom Adjustment
z
z
Far Focus Adjustment
z
z
z
Near Focus Adjustment
z
z
z
White Balance Adjustment
z
z
Set Language Destination
z
4-1-4. Handing of Firmware
Note1:
Save the firmware file in the root directory of Memory Stick PRO Duo.
Saving it in the other directory causes the malfunction of program.
Note2:
The firmware file is downloadable from the ESI homepage.
Preparations:
First, format the Memory Stick PRO Duo before copying the firmware.
When formatting, perform on the PC, using the FAT. Do not format on the unit.
If the concealed file “MEMSTICK.IND” exists, delete it.
Decompress the file and confirm the file format as shown below.
Adjusting firmware file for DSC-W310:
SDMC452C.bin
Save the file in the root directory of Memory Stick PRO Duo.
And also save the file of “lang.txt” in the root directory Memory Stick PRO Duo when replacing Main board.
Refer to [4-2-7. Set Language Destination] for “lang.txt”.
This Memory Stick PRO Duo saved the firmware is used in the adjustments.
Adjustment mode:
1. With the camera turned OFF, set the Mode switch to “ (Still image)” and insert the Memory Stick PRO Duo with the firmware files into the
Memory Stick slot of the camera.
2. While pressing the “ (Delete)” button, press the “ON/OFF (Power)” button and release when the ON/OFF (Power) lamp and the LCD display
turns on. Release the “ (Delete)” button when the ON/OFF (Power) lamp and the LCD display goes out.
3. After a few seconds, the LCD display will turn white and then show the Adjustment mode screen.
Pushing “MENU” button, the adjustment is finished makes to return to the initial screen display for adjustments.
In case of adjusting continuously, go to the next step with above-mentioned operation.
Changing the Mode dial will take you out of the Adjustment mode.
When all adjustments are completed, just simply remove the power from the unit completes the adjustment procedure.
4-1-2. List of Service Tools and Equipments
J-5
Small pattern box
PTB-1450
J-6082-557-A
J-4
Chart
(Note)
J-6
Rechargeable battery pack
NP-BN1
Camera table
Fig. 4-1-1
J-6082-384-A
J-1
J-3
SONY
Memory Stick PRO Duo
(256 MB or more)
J-2
Mini flange back jig
J-6082-719-A
or
Flange back
adjustment jig
J-6082-563-A
Note1:
256MB or more
Note2:
Use the fully charged battery (NP-BN1) on adjustment.
The external battery source cannot be used on repairing.
Fig. 4-1-2
DSC-W310
Bottom side
Memory Stick PRO Duo
(Note1)
DSC-W310
battery(NP-BN1)
(Note2)
Click on the first or last page to see other DSC-W310 (serv.man2) service manuals if exist.