Read Sony DSC-W200 (serv.man2) Service Manual online
2-6
DSC-W200_L2
2-2. EXCHANGE METHOD OF THE ZOOM (1210) GEAR BLOCK ASSY
2-2-1. HOW TO REMOVE THE ZOOM(1210) GEAR BLOCK ASSY
1
Remove two screws, remove the zoom (1210) gear block assy.
2
Remove soldering from the two points and remove the flexible board from the D.C. motor.
3
Remove the claws at two locations by pushing two locations of the portion A of FG leaf spring in the direction of the arrow.
Then, remove the FG leaf spring.
4
Remove the sensors at two locations and remove the flexible board from the zoom (1210) gear block assy.
1
Screws
1
Zoom (1210)
Gear Block Assy
4
Zoom (1210) Gear Block Assy
3
FG Leaf Spring
A
Claws
2
Solderings
4
Sensors
D.C. Motor
2-2-2. HOW TO INSTALL THE ZOOM(1210) GEAR BLOCK ASSY
1
Install the sensors to the new zoom (1210) gear block assy at two locations.
2
Install the FG leaf spring.
Note:
Install the claw A and claw B in order.
3
Install the flexible board to the D.C. motor and solder at two locations.
4
Install the zoom (1210) gear block assy and tighten two screws.
*Tightening torque=0.049 0.01N m(0.5 0.1kgf cm)
4
Screws
4
Zoom (1210)
Gear Block Assy
1
New Zoom (1210)
Gear Block Assy
2
FG Leaf
Spring
Claw
A
Claw
B
3
Solderings
1
Sensors
D.C. Motor
Note:
The lens should be retracted into the camera body before starting the work.
Click on the first or last page to see other DSC-W200 (serv.man2) service manuals if exist.