Read Sony DSC-W200 (serv.man2) Service Manual online
2-10
DSC-W200_L2
1
Screws
3
Screws
1
New Barrier Assy
New Barrier Assy
Contacts of Parts
1
Install the new barrier assy and fix it temporarily with two screws so that it can move slightly.
2
Install temporarily the new ornamental ring (A) and adjust the position of barrier assy.
*The top sides of barrier assy and ornamental ring should be flat.
Take care for contacts of parts not to conflict each other.
Take care for contacts of parts not to conflict each other.
3
Remove the ornamental ring (A) once and tighten firmly it again with two screws with extra torque.
*Tightening torque=0.059 0.01N m(0.6 0.1kgf cm)
4
Affix the new barrier tape and then install the ornamental ring (A).
New Ornamental
Ring (A)
Ring (A)
2
New Ornamental
Ring (A)
3
New Ornamental Ring (A)
4
New Ornamental Ring (A)
4
New Barrier Tape
2
Adjust the position of barrier assy.
2-3-2. HOW TO INSTALL THE BARRIER ASSY
Click on the first or last page to see other DSC-W200 (serv.man2) service manuals if exist.