Read Sony DSC-TX5 (serv.man2) Service Manual online
DSC-TX5_L2
1-8
2. Set the Waterproof Adhesive Sheet (TP) to cabinet (rear) assy aligning the each pin position.
3. Remove the cabinet (rear) assy from LCD-pusher, and then attach the adhesive paper by tracing it from center to both ends.
Note: Confirm that there are no air bubble and wrinkle.
4. Peel off the release paper of adhesive paper.
5. Pass through the LCD flexible into the corresponding hole, and set it down into the cabinet (rear) assy.
Note: Do not touch the adhesive paper.
6. Pass through the TP flexible board into the corresponding hole, and insert the TP Flexible Grommet into the deep.
7. Attach the touch panel assy to cabinet (rear) assy with pushing the portion of adhesive paper tightly.
Note: • Trace from center to both ends.
• Attach it after confirming that there is no dust on the LCD and TP.
– ENGLISH –
Click on the first or last page to see other DSC-TX5 (serv.man2) service manuals if exist.