Read Sony DSC-T3 / DSC-T33 (serv.man4) Service Manual online
6-26
DSC-T3
1-5-3.
Adjusting Method
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during LCD Adj.
2. VCO Adj.
3. Contrast Adj.
4. V-COM Adj.
5. Sample-Hold Position Adj.
6. White Balance Adj. (1)
7. White Balance Adj. (2)
8. Release of Data Setting during LCD Adj.
sequence]
1. Data Setting during LCD Adj.
2. VCO Adj.
3. Contrast Adj.
4. V-COM Adj.
5. Sample-Hold Position Adj.
6. White Balance Adj. (1)
7. White Balance Adj. (2)
8. Release of Data Setting during LCD Adj.
[Adjusting method]
1) Click the
1) Click the
[LCD Adjustment Start]
button.
2) The Automatic Adjustment Program executes the items from
“1. Data Setting during LCD Adj.” to “3. Contrast Adj.”.
3) Upon successful completion of the “3. Contrast Adj.”, the fol-
lowing message is displayed during execution in “4. V-COM
Adj.”. On the SEUS screen, operate the UP/DOWN key so
that the brightness of portions A and B on the LCD panel is
equal. After the adjustment, click the
Adj.”. On the SEUS screen, operate the UP/DOWN key so
that the brightness of portions A and B on the LCD panel is
equal. After the adjustment, click the
[OK]
button.
Fig. 6-1-57
4) Upon completion of “4. V-COM Adj.”, “5. Sample-Hold Posi-
tion Adj.” is executed. The following message is displayed,
and then on the SEUS screen, operate the UP/DOWN key to
change the data in a range of 78 to 7D so that the brightness of
the LCD screen becomes the brightest. After the adjustment,
click the
and then on the SEUS screen, operate the UP/DOWN key to
change the data in a range of 78 to 7D so that the brightness of
the LCD screen becomes the brightest. After the adjustment,
click the
[OK]
button in the message.
Fig. 6-1-58
5) Upon completion of “5. Sample-Hold Position Adj.”, “6. White
Balance Adj. (1)” is executed.
6) Upon successful completion of “6. White Balance Adj. (1)”,
“7. White Balance Adj. (2)” is executed. The following mes-
sage is displayed, and then check that LCD screen is not col-
ored.
If colored, change the data of page: 8F, address: 28 and 2A on
the SEUS Operation screen to adjust so that the LCD screen is
not colored.
sage is displayed, and then check that LCD screen is not col-
ored.
If colored, change the data of page: 8F, address: 28 and 2A on
the SEUS Operation screen to adjust so that the LCD screen is
not colored.
Fig. 6-1-59
7) If the
[OK]
button is clicked, “8. Release of Data Setting dur-
ing LCD Adj.” will be executed.
8) Upon successful completion of all items of the LCD adjust-
ment, the following message is displayed. Click the
[OK]
but-
ton.
Fig. 6-1-60
SEUS operation screen
Fig. 6-1-61
Check on the LCD screen (V-COM Adj.)
Fig. 6-1-62
UP/DOWN key
A
A
A
A
B
B
B
B
Click on the first or last page to see other DSC-T3 / DSC-T33 (serv.man4) service manuals if exist.