Read Sony DSC-T3 / DSC-T33 (serv.man4) Service Manual online
6-22
DSC-T3
6) A picture captured by the camera is displayed on the screen,
and the checking is performed.
The checking result is displayed on the vector scope screen.
The checking result is displayed on the vector scope screen.
Fig. 6-1-45
Note:
If the following message is displayed, the picture frame
setting is faulty. Check the picture frame, and then perform
readjustment.
setting is faulty. Check the picture frame, and then perform
readjustment.
Fig. 6-1-46
7) Upon successful completion of the checking, the following
message is displayed. Click the
[OK]
button.
Fig. 6-1-47
8.
Color Reproduction Check
[Checking method]
1) Start the Color Adjustment Program
1) Start the Color Adjustment Program
(T3ColorAdjustment.exe).
2) Click the
[Connect]
button to set the camera to the adjust-
ment mode.
Fig. 6-1-43
3) Adjust the mode switch of the camera to “CAMERA” and set
MACRO mode. Shoot the 9 colors chart with the zoom at WIDE
end.
end.
4) Adjust the camera direction and distance to set the picture
frame. (Refer to 4. Picture Frame Setting)
5) Click the
[Color Reproduction Check]
button.
Fig. 6-1-44
Click on the first or last page to see other DSC-T3 / DSC-T33 (serv.man4) service manuals if exist.