DSC-T3, DSC-T33 (serv.man4) - Sony Digital Camera Service Manual (repair manual). Page 26

6-24

DSC-T3

“CAMERA Adjustment 5” is available only once after
the power is turned on. If the adjustment is retried, turn
off the power and turn on again.

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Strobe Adj.
3. Auto Focus Illumination Check
4. Release of Data Setting during Camera Adj.

[Adjusting method]
1) Click the 

[CAMERA Adjustment 5 Start]

 button.

2) The Automatic Adjustment Program executes the “1. Data

Setting during Camera Adj.”.

3) Upon successful completion of the “1. Data Setting during

Camera Adj.”, the following message is displayed. Set the sub-
ject in accordance with the message.
(For the Flash adjustment box, refer to “3. Preparing the Flash
Adjustment Box” (see page 6-6).)

4) Press the 

[OK]

  button, and the “2. Strobe Adj.” will be ex-

ecuted.

5) During execution of “2. Strobe Adj.”, the following message

is displayed. After checking the flashing of strobe light, click
the 

[OK]

  button. (This message is displayed 6 times during

execution of adjustment.)

6) Upon successful completion of “2. Strobe Adj.”, “3. Auto Fo-

cus Illumination Check” is executed.  In “3. Auto Focus Illu-
mination Check”, first the data value is checked. If the data
value check failed, the following message is displayed. Make
a check by attaching the AF illumination axis frame to the
monitor TV screen in accordance with the message.

 This message is not displayed when data value is

normal. (A checking with the AF illumination axis
frame is not necessary.)

7) Upon successful completion of the “3. Auto Focus Illumina-

tion Check”, the “4. Release of Data Setting during Camera
Adj.” will be executed successively.

8) Upon successful completion of all items of the CAMERA

Adjustment 5, the following message is displayed. Click the

[OK]

 button.