Read Sony DSC-T1 (serv.man2) Service Manual online
6-20
DSC-T1
10. Auto White Balance 5800K Standard Data Input
Adjust the white balance standard data at 5800K.
Mode
STILL (
)
Subject
Clear chart (Standard picture frame)
Filter
Filter C14 for color temperature
correction
correction
Measurement Point
Data of page: 6E, address: 4F
Measuring Instrument
Adjustment Page
6E
Adjustment Address
24 to 41
Specified value
00
Note1:
Before perform this adjustment, perform “Auto White Balance
3200K Standard Data Input”.
3200K Standard Data Input”.
Note2:
If the data of page: 60, address: 02 is “01”, select page: 60, address:
01, and set data: 00.
01, and set data: 00.
Switch setting:
ZOOM ........................................................................... WIDE end
ZOOM ........................................................................... WIDE end
Adjusting method:
Order Page Address Data
Procedure
1
Place the C14 filter for color
temperature correction on the lens.
temperature correction on the lens.
2
Check that “1. Data Setting during
Camera System Adjustments” is
performed.
Camera System Adjustments” is
performed.
3
Check the picture frame. If
deviated, perform “5. Picture
Frame Setting”.
deviated, perform “5. Picture
Frame Setting”.
4
6E
4F
FF
Set the data.
5
60
36
02
Set the data.
6
60
01
A5
Set the data.
7
Wait for 5 sec.
8
60
02
Read the data, and check it is
“01”. (Note3)
“01”. (Note3)
9
6E
4F
Read the data, and check it
satisfies the specified value.
satisfies the specified value.
Note3:
The adjustment data will be automatically input to page: 6E,
address: 24 to 41.
address: 24 to 41.
Processing after Completing Adjustments:
Order Page Address Data
Procedure
1
60
01
00
Set the data.
2
60
36
00
Set the data.
3
Perform “Auto White Balance
5800K Check”.
If finish the camera system
adjustments, release the data
setting.
(See “1. Data Setting during
Camera System Adjustments”.)
5800K Check”.
If finish the camera system
adjustments, release the data
setting.
(See “1. Data Setting during
Camera System Adjustments”.)
11. Auto White Balance 5800K Check
Check that the white balance standard data at 5800K are inputted
properly.
properly.
Mode
STILL (
)
Subject
Clear chart (Standard picture frame)
Filter
Filter C14 for color temperature
correction
correction
Measurement Point
Data of page: 6E, address: 4F
Measuring Instrument
Specified value
00
Note1:
Before perform this adjustment, perform “Auto White Balance
5800K Standard Data Input”.
5800K Standard Data Input”.
Note2:
If the data of page: 60, address: 02 is “01”, select page: 60, address:
01, and set data: 00.
01, and set data: 00.
Switch setting:
ZOOM ........................................................................... WIDE end
Adjusting method:
Order Page Address Data
Procedure
1
Place the C14 filter for color
temperature correction on the lens.
temperature correction on the lens.
2
Check that “1. Data Setting during
Camera System Adjustments” is
performed.
Camera System Adjustments” is
performed.
3
Check the picture frame. If
deviated, perform “5. Picture
Frame Setting”.
deviated, perform “5. Picture
Frame Setting”.
4
6E
4F
FF
Set the data.
5
60
36
04
Set the data.
6
60
01
3F
Set the data.
7
Wait for 10 sec.
8
60
02
Read the data, and check it is “01”.
9
6E
4F
Read the data, and check it
satisfies the specified value.
satisfies the specified value.
Processing after Completing Adjustments:
Order Page Address Data
Procedure
1
60
01
00
Set the data.
2
60
36
00
Set the data.
3
Remove the C14 filter.
4
Perform next adjustments.
If finish the camera system
adjustments, release the data
setting.
(See “1. Data Setting during
Camera System Adjustments”.)
If finish the camera system
adjustments, release the data
setting.
(See “1. Data Setting during
Camera System Adjustments”.)
Click on the first or last page to see other DSC-T1 (serv.man2) service manuals if exist.