Read Sony DSC-T1 (serv.man2) Service Manual online
6-16
DSC-T1
4. Flange Back Check
Mode
STILL (
)
Subject
Siemens star
(1.0 m from the front of the lens)
(Luminance : 200 to 400 lux)
(1.0 m from the front of the lens)
(Luminance : 200 to 400 lux)
Measurement Point
Check operation on TV monitor
(under scan mode)
(under scan mode)
Measuring Instrument
Specified Value
The lens is focused.
Switch setting:
ZOOM ........................................................................... TELE end
ZOOM ........................................................................... TELE end
MACRO (
) ......................................................................... OFF
Checking method:
Order Page Address Data
Procedure
1
Turn off the power and turn on
again
again
2
Place the siemens star 1.0 m from
the front of the lens.
the front of the lens.
3
Shoot the siemens star with the
zoom TELE end.
zoom TELE end.
4
60
8C
30
Set the data.
5
Observe the TV monitor and
check that the lens is focused.
check that the lens is focused.
6
60
2C
01
Set the data.
7
Press the ZOOM WIDE button
and check that zoom operation is
normal.
and check that zoom operation is
normal.
8
Shoot the Siemens star with the
zoom WIDE end.
zoom WIDE end.
9
Observe the TV monitor and
check that the lens is focused.
check that the lens is focused.
Processing after Completing Adjustments:
Order Page Address Data
Procedure
1
60
8C
00
Set the data.
Click on the first or last page to see other DSC-T1 (serv.man2) service manuals if exist.