Read Sony DSC-T1 (serv.man2) Service Manual online
6-14
DSC-T1
2. Wide Limit Adjustment
Adjusted the dispersion of the wide-end of the inner focus lens.
Adjustment Page
6F
Adjustment Address
18, 19
2-1. Adjusting method when the lens device is replaced:
Adjusting method:
Order Page Address Data
Procedure
1
00
01
01
Set the data.
2
6F
18
Set the data. (Note)
3
6F
19
Set the data. (Note)
4
Save the data.
5
Wait for 2 sec.
6
Perform “Flange Back
Adjustment”.
Adjustment”.
Note:
The data of page: 6F, address: 18 and 19 are written on the sheet
that is supplied with the lens device.
that is supplied with the lens device.
2-2. Adjusting method when the SY-95 board is replaced:
When the data of page: 6F, address: 18 and 19 can be
read from the defective board before replacing it. And
the data are both “00”.
read from the defective board before replacing it. And
the data are both “00”.
Processing after Completing Adjustments:
Order Page Address Data
Procedure
1
00
01
01
Set the data.
2
6F
18
00
Set the data.
3
6F
19
00
Set the data.
4
Save the data.
5
Wait for 2 sec.
6
Perform “Flange Back
Adjustment”.
Adjustment”.
When the data of page: 6F, address: 18 and 19 can be
read from the defective board before replaceing it. But
either of the data is not “00”.
read from the defective board before replaceing it. But
either of the data is not “00”.
1)
Replace the lens device and perform “2-1. Adjusting method
when the lens device is replaced.”
when the lens device is replaced.”
When the data of page: 6F, address: 18 and 19 cannot be
read from the defective board.
read from the defective board.
1)
Replace the lens device and perform “2-1. Adjusting method
when the lens device is replaced.”
when the lens device is replaced.”
Click on the first or last page to see other DSC-T1 (serv.man2) service manuals if exist.