Read Sony DSC-S85 (serv.man2) Service Manual online
– 21 –
Adjusting method:
Order Page Address Data
Procedure
1
0
01
01
2
Perform “Data setting during
camera system adjustments”.
(Refer to page 5-14)
camera system adjustments”.
(Refer to page 5-14)
3
6
90
00
4
6
91
00
5
6
92
FF
6
6
93
FF
7
6
2C
01
8
6
01
79
Press PAUSE button.
9
6
07
Check the data changes to “01”.
10
6
01
67
Press PAUSE button.
11
Check the flashing of strobe
light.
light.
12
6
02
Check the data changes to “01”.
13
6
01
00
Press PAUSE button.
14
6
01
67
Press PAUSE button.
15
Check the flashing of strobe
light.
light.
16
6
02
Check the data changes to “01”.
17
6
01
00
Press PAUSE button.
18
7
03
05
Press PAUSE button.
19
6
01
B9
Press PAUSE button. (Note 7)
20
Check the flashing of strobe
light.
light.
21
6
02
Check the data changes to “01”.
22
6
01
00
Press PAUSE button.
23
7
03
04
Press PAUSE button.
24
6
01
67
Press PAUSE button.
25
Check the flashing of strobe
light.
light.
26
6
02
Check the data changes to “01”.
27
F
64
Check that the data satisfies
the Y level data satisfied
value. (Note 4)
the Y level data satisfied
value. (Note 4)
28
0
03
02
29
1
Check the R-Y and B-Y level
data (Note 5) satisfies the
specified value.
data (Note 5) satisfies the
specified value.
Note 7:
The adjustment data will be automatically input to
page: F, address: 4D, 4E, 64 and 69 to 6B.
page: F, address: 4D, 4E, 64 and 69 to 6B.
Processing after Completing Adjustment:
Order Page Address Data
Procedure
1
0
03
00
2
6
01
00
Press PAUSE button.
3
6
2C
00
4
6
92
00
5
6
93
00
6
Release the data setting
performed at step 2 .
(Refer to page 5-14)
performed at step 2 .
(Refer to page 5-14)
7
0
01
00
17. Strobe White Balance Adjustment
Adjust the white balance when the strobe light flashed.
Mode
CAMERA
Subject
Flash adjustment box (Note 3)
(1.0 m from the front of the lens)
(1.0 m from the front of the lens)
Adjustment Page
F
Adjustment Address
4D, 4E, 64, 69 to 6B
Specified Value
Y level data: 60 to 94 (Note 4)
R-Y level data: FA to FF or 00 to 06
(Note 5)
B-Y level data: FA to FF or 00 to 06
(Note 5)
R-Y level data: FA to FF or 00 to 06
(Note 5)
B-Y level data: FA to FF or 00 to 06
(Note 5)
Note 1:
Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.
If not, turn the power of unit OFF/ON.
Note 2:
Perform this adjustment in the Flash adjustment box.
Note 3:
Refer to “4. Preparing the Flash adjustment box”. (See
page 5-7)
page 5-7)
Note 4:
Displayed data of page: F, address: 64, of the adjusting
remote commander.
remote commander.
F:XX:64
Y level data
Note 5:
The right four digits of the page: 1 displayed data of the
adjusting remote commander.
adjusting remote commander.
1:XX:XX
B-Y level data
R-Y level data
R-Y level data
Note 6:
“Strobe White Balance Adjustment” is available only
once after the power is turned on. Turn the power off,
then on again if the adjustment is retried.
once after the power is turned on. Turn the power off,
then on again if the adjustment is retried.
Switch setting:
1) FLASH ........................ ON
1) FLASH ........................ ON
Click on the first or last page to see other DSC-S85 (serv.man2) service manuals if exist.