Read Sony DSC-S40 (serv.man14) Service Manual online
DSC-S40
2. DESMONTAGEM
2-1
2-2
The following flow chart shows the disassembly procedure.
2-1. DESMONTAGEM
2. DESMONTAGEM
Note: High-voltage cautions
Discharging the Capacitor
Short-circuit between the two points with the short jig
about 10 seconds.
Short-circuit between the two points with the short jig
about 10 seconds.
1
4
2
3
3
2
to Page 2-3
1
Screw
x2
2
Claw
x4
3
Boss
x4
4
FP-176 flexible board
1
Connector: CN501
2
Claw
x1
3
Rifting up the cabinet (upper) block.
4
Connector: CN004
5
Cabinet (upper) block
1
Open the MS lid.
2
Screw
x3
3
Open the BT lid.
4
Claw
x3
5
Claw
x1
6
Claw
x1
1
Connector
x2
: CN201, 401
2
Claw
x1
3
Connector: CN002
4
Lens block
1
2
4
3
5
1
2
4
3
When you disassemble the FP-176 flexible board,
assemble with refer to page 2-7 " The method of
attachment of FP-176 flexible board ".
assemble with refer to page 2-7 " The method of
attachment of FP-176 flexible board ".
2
2
2
4
5
0
7
4
3
6
8
8
1
9
qa
Note: The cautions at the time of lens block handling
In case you deal with a lens block,
be careful of the following things.
be careful of the following things.
Touch the flexible board of motor side recklessly or
don't bend it., because the mounted chip parts could
be peeled if the flexible board is curved.
don't bend it., because the mounted chip parts could
be peeled if the flexible board is curved.
CD-575 flexible board is integrated with the lens block.
Do not touch or separate the CD board.
CD-575 flexible board becomes only exchange by lens block.
Do not touch or separate the CD board.
CD-575 flexible board becomes only exchange by lens block.
Have the portion of upper
and lower arrows with
two fingers.
and lower arrows with
two fingers.
R:1 k
Ω
/1 W
(Part code:
1-215-869-11)
1-215-869-11)
7
Cabinet (rear) block
8
Claw
x2
9
Claw
x2
0
Connector: CN003
qa
Cabinet (front) block
HELP
Click on the first or last page to see other DSC-S40 (serv.man14) service manuals if exist.