Read Sony DSC-S40 (serv.man14) Service Manual online
1-3
DSC-S40
1-5. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.)
Note: 1
When replacing the SY-116 board, erase the data in internal memory of the board before replacement.
Note: 2
When replacing the SY-116 board or the IC1401 on the SY-116 board, execute formatting and initialize the internal memory after
replacement.
replacement.
Method for Copying the Data in Internal Memory
Method for Formatting the Internal Memory
Copies all images in the internal memory to a “Memory Stick”.
1
Insert a “Memory Stick” having 32 MB or larger capacity.
2
Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be copied Ready?” appears.
The message “All data in internal memory will be copied Ready?” appears.
3
Select [OK] with v , then press z.
Copying starts.
Copying starts.
• Use batteries with enough capacity or the AC Adaptor (not supplied). If you attempt to copy image files
using batteries with little remaining capacity, the batteries may run out, causing copying to fail or possibly
corrupting the data.
corrupting the data.
• You cannot copy individual images.
• The original images in the internal memory are retained even after copying. To delete the contents of the
internal memory, remove the “Memory Stick” after copying, then execute the [Format] command in
Internal Memory Tool.
• You cannot select a folder copied on a “Memory Stick”.
• The setting of
(Print order) marks is not copied even when you copy data.
Copy
OK
See the following procedure.
Cancel
Cancels the copying.
Copying
102_COPY
Formats the internal memory.
• Note that formatting irrevocably erases all data in the internal memory, including even protected images.
1
Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be erased Ready?” appears.
The message “All data in internal memory will be erased Ready?” appears.
2
Select [OK] with v, then press z.
The format is complete.
The format is complete.
Format
OK
See the following procedure.
Cancel
Cancels the formatting.
Click on the first or last page to see other DSC-S40 (serv.man14) service manuals if exist.