Read Sony DSC-RX100M2 (serv.man2) Service Manual online
DSC-RX100M2_L2
2-4
2-1. EXPLODED VIEWS
2-1-1. OVERALL SECTION-1
ns : not supplied
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
1
4-467-789-01
BOTTOM (710), CABINET
2
4-467-782-01
LID (710), USB
3
4-467-783-01
LID (710), HDMI
4
1-490-435-11
SWITCH BLOCK, CONTROL(SW63500)
5
X-2587-533-1 CABINET (REAR) ASSY (710)
6
4-433-887-01
SHEET (PAD) (500), ADHESIVE
7
4-433-888-01 PAD
(500)
#177
3-208-537-21
0+Z M1.4X2 NEW TORASUTA
#196
4-178-124-01
SPECIAL (M1.4 (D2.75)) (Note)
#247
4-412-769-11
SCREW (M1.4), NEW TRU-STAR, P2 (Note)
1. Remove in numerical order (
1
to
4
) in the left figure.
DISASSEMBLY
1
#247 X 5 → Open the Battery lid (
1
)
Bottom View
Front View
#247
1
Screw
Note: This screw cannot be reused. Discard the screw removed
once in servicing. Instead, use a new screw.
Note: このねじは再利用することができません。サービス対応時に一
度でも外した場合は新品のねじと交換してください。
#177: M1.4 X 2.5
(Red)
3-208-537-21
3-208-537-21
2.5
1.4
7
6
#247
(Note)
#247
(Note)
#196
(Note)
ns
#196
(Note)
#196
(Note)
#247
(Note)
#177
#247
(Note)
#247
(Note)
#247
(Note)
Claws
Claws
Claws
Claws
Overall Section-2
(See page 2-5)
1
1
2
4
5
3
4
3
2
Hinge Block Section
(See page 2-8)
1
4-1
4-2
4-3
2
ns
Do not touch the front side and back side of the
antenna board and hold the side edges of the
antenna board.
antenna board and hold the side edges of the
antenna board.
This screw is used to secure the hinge block
section, but remove it to detach the cabinet (rear)
assy during disassembly.
In the assembly process, however, do not install
this screw to attach the cabinet (rear) assy, but
tighten this screw to secure the hinge block
section, but remove it to detach the cabinet (rear)
assy during disassembly.
In the assembly process, however, do not install
this screw to attach the cabinet (rear) assy, but
tighten this screw to secure the hinge block
2
Tilt the LCD (
2
) → #196 X 3 → #247 X 5
Back View
Right View
Right View
Left View
Remove the Cabinet (Rear) Assy
to the position shown in the figure.
to the position shown in the figure.
Displace the
Cabinet (Rear) Assy
Cabinet (Rear) Assy
#247
#247
#196
2-1
1
Tilt the LCD.
3
Pull out the USB Lid
Claws
A
5
4
2
Tweezers
USB Lid
While lifting the A portion of the
USB Lid slightly with tweezers or
the like, pull the USB Lid in the
direction of arrow to disengage it.
USB Lid slightly with tweezers or
the like, pull the USB Lid in the
direction of arrow to disengage it.
Remove Cabinet (Rear) Assy
while turning it in the
direction indicated by arrows.
while turning it in the
direction indicated by arrows.
#247
4
#177 X 1 → Remove the Antenna (Wi-Fi) (
4
-1
) → #247 X 2 → Remove the Plate (SP) (710) (
4
-2
)
→ Remove the Speaker (
4
-3
)
Right View
Back View
Left View
#247
#247
4-1
#177
#196: M1.4 X 2.0
(Black)
4-178-124-01
4-178-124-01
2.0
1.4
#247: M1.4 X 2.5
(Black)
4-412-769-11
4-412-769-11
2.5
1.4
Click on the first or last page to see other DSC-RX100M2 (serv.man2) service manuals if exist.