Read Sony DSC-QX100 Service Manual online
DSC-QX100
3-2
3-2. NOTES ON REMOVING/INSTALLING THE IMAGER BOARD (CD-847B FLEXIBLE
BOARD)
When the CD-847B Flexible Board (Imager) is mounted to the lens, shift and tilt adjustment is made with Spacer Plates.
When removing the CD-847B Flexible Board, pay attention to the following.
When removing the CD-847B Flexible Board, pay attention to the following.
(1) When the lens is not replaced
Example: In the case of disassembly, cleaning, or replacement of the CD-847B Flexible Board (Imager)
• Check and record the size of the built-in three Spacer Plates and store them so as not to lose them.
• When assembling the CD-847B Flexible Board, be sure to install the Spacer Plates to their original locations.
• When assembling the CD-847B Flexible Board, be sure to install the Spacer Plates to their original locations.
Size
0.xx
Note
Be careful not to lose the Spacer Plates.
If any Spacer Plate is lost or their previous positions are not sure, repeatedly take a photo and check that there is no local defocus.
Be careful not to lose the Spacer Plates.
If any Spacer Plate is lost or their previous positions are not sure, repeatedly take a photo and check that there is no local defocus.
Selecting appropriate Spacer
Plates
is needed.
(2) When the lens is replaced
• Check the size of the built-in three Spacer Plates. If the thickness of a Spacer Plate is not 0.20, discard the Spacer Plate.
• Prepare three Spacer Plates (B) (t = 0.2) (Sony Part No.: 4-410-540-01) and install them to the new lens.
• Prepare three Spacer Plates (B) (t = 0.2) (Sony Part No.: 4-410-540-01) and install them to the new lens.
0.20
– ENGLISH –
Click on the first or last page to see other DSC-QX100 service manuals if exist.