Read Sony DCR-SR50E / DCR-SR60 / DCR-SR60E / DCR-SR70E / DCR-SR80 / DCR-SR80E (serv.man9) Service Manual online
SERVICE MANUAL
Auto-ADJ
Ver. 1.1 2007.04
Sony EMCS Co.
9-852-138-87
2007D0500-1
© 2007.4
Published by Kohda TEC
SUPPLEMENT-1
File this supplement with the service manual.
(DI06-192)
• Change of G Sensor Check
DCR-SR50E/SR60/SR60E/SR70E/SR80/SR80E_ADJ
RMT-835
DCR-SR50E/SR60/SR60E/SR70E/SR80/SR80E
7.
G Sensor Check
(Service manual page 6-52)
Page 7
Address 95, 97, 99 to 9B
Note 1: Check that the data of page: 0, address: 10 is “00”.
Using method:
1) Place the camcorder in horizontal state.
2) Select page: 7, address: 95, 97 and 99 to 9B.
3) Read the displayed data and check that the data values are within
1) Place the camcorder in horizontal state.
2) Select page: 7, address: 95, 97 and 99 to 9B.
3) Read the displayed data and check that the data values are within
respective specified values.
Note 2: For the address: 99 to 9B, the data values will vary
depending on how the camcorder is placed.
If the data values are out of the specified ranges, re-place
the camcorder correctly up to three times and if even once
the data values are within the specified values, the sensor
is normal.
If the data values are out of the specified ranges, re-place
the camcorder correctly up to three times and if even once
the data values are within the specified values, the sensor
is normal.
Address
95
97
99
9A
9B
Function
Data
(Specified value)
GSENS-REF (VC-463 board SE981)
70 to 8F
GSENS-TEMP (VC-463 board SE981)
68 to AE
GSENS-X (VC-463 board SE981)
58 to 69 (Note 2)
GSENS-Y (VC-463 board SE981)
76 to 86 (Note 2)
GSENS-Z (VC-463 board SE981)
76 to 86 (Note 2)
: Points changed portion.
6-2. SERVICE MODE
2-5.
SERVICE MODE
Display
