DSC-KW1, DSC-KW11 - Sony Digital Camera Service Manual (repair manual). Page 11

DSC-KW1/KW11

2-3

In case of replacing the MAIN BOARD ASSY, it is necessary to erase the customer’s data from the board to be replaced. 
Thus, before replacing the board, perform [Initialize] and [Format]. 

Methoid for Initializing the Internal Memory or Memory Card

,QLWLDOL]H

,QLWLDOL]HVVHWWLQJVWRWKHGHIDXOWVHWWLQJ
(YHQLI\RXH[HFXWHWKLVIXQFWLRQLPDJHVDUHUHWDLQHG

 0(18

6HWWLQJV

0DLQ6HWWLQJV>,QLWLDOL]H@>2.@

%HVXUHQRWWRUHPRYHWKHEDWWHU\SDFNZKLOHLQLWLDOL]LQJ

For [Format], refer to “2-2. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY”. 
When replacing with a MAIN BOARD ASSY, implement the work below. 
• Perform the adjustments and Set Language Destination 

referring to “4. ADJUSTMENT”. 

• Search the access point as concise operation confirmation of wireless LAN.

Note: After the replacement and repair, the MAC address is changed, and thus the resetting for connection devices is required. Accordingly, print out the flyer 

given at the last page of this service manual and attach it to the set when returning the set to customer.

 

After replacing the NFC PC BOARD or MAIN BOARD ASSY, Perform [SSID/PW Reset].

SSID/PW Reset

This product shares the connection information for [Send to Smartphone] and [Ctrl with Smartphone] with a device
that has permission to connect. If you want to change the device that is permitted to connect, reset the connection
information.

1. MENU - @ (Wireless) - [SSID/PW Reset] - [OK]

After resetting the connection information, and if you connect this product to the smartphone, you must register the
smartphone again.

The changed portions from
Ver. 1.0 are shown in blue.