Read Sony DSC-HX5 / DSC-HX5C / DSC-HX5V (serv.man2) Service Manual online
DSC-HX5/HX5C/HX5V_L2
1-7
– ENGLISH –
1-7 . ORNAMENTAL RING A OR BARRIER ASSY REPLACING METHOD
2
Peel off release papers of Barrier Tapes.
3
Install Ornamental Ring A and press it lightly.
Installation
5
Remove Barrier Assy by disengaging four claws.
Removal
1
1
Turn on the power switch and extend the lens.
2
Detach the battery.
4
Remove while turning the Ornamental Ring A right and left.
3
Pour a solvent such as alcohol from four places A to the tweezers or a needle shown below into a gap of Ornamental Ring A.
Barrier Tapes
Barrier Tapes
Ornamental Ring A
1
With four claws fitted in position, install the Barrier Assy.
Hole
Tweezers
Claws
Claws
Barrier Assy
A
A
Ornamental Ring A
Solvent
Barrier Assy
Claws
Claws
Barrier
Lever
Removal
1-8. CAM TUBE BLOCK REPLACING METHOD
1
Remove the four soldering, and disconnect the flexible board form the connector.
2
Remove the flexible board from the three tabs with peeling off the adhesive tapes.
3
Remove the screw, and remove the zoom motor.
Flexible
Board
Board
Flexible
Board
Board
Solders
Connector
Flexible
Board
Board
Adhesive Tapes
Adhesive Tapes
Tabs
Screw
Zoom Motor
Click on the first or last page to see other DSC-HX5 / DSC-HX5C / DSC-HX5V (serv.man2) service manuals if exist.