DSC-H90 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 8

DSC-H90_L2

1-6

q;

qa

Turn the Naruto Gear jig counterclockwise to set the camera body in the retracted state.
Note: Turn the Naruto Gear jig to the maximum.
Remove the Main Unit from the Stationary Tube.

Naruto GearLKI

Stationary Tube

Main unit

qs

qd

Cam Tube

Lubricated Assy

Liner Guide

Tube A Assy

1 lens block

Liner Guide

Tube A Assy

2-3 lens block

While pressing the Cam Tube Lubricated Assy to prevent it from turning, turn the Liner Guide Tube A Assy clockwise
approx. 140 degrees to extend the 1 lens block.
Remove the 2-3 lens block from the Liner Guide Tube A Assy.

Projection of

Liner Guide Tube

A Assy 

Projection of

Liner Guide Tube A Assy

140 degrees

140 degrees

qf

qg

While pressing the 3 Lens Assy lightly with fingers to prevent it from popping out, turn the Liner Guide Tube B Lubricated clockwise
to the maximum and remove the 3 Lens Assy from the Liner Guide Tube B Lubricated.

1 lens Assy,

Barrier Assy,

Ornamental Ring (A)

Liner Guide

Tube A Assy

Liner Guide Tube

B Lubricated

Liner Guide Tube

B Lubricated

Press 3 Lens Assy

lightly with fingers

Liner Guide Tube

B Lubricated

3 Assy Spring

Spring insertion

hole

3 Lens Assy

Remove the 1 Lens Assy, Barrier Assy, and Ornamental Ring A from the Liner Guide Tube A Assy.
Note:

Ornamental

Ring A

1 Lens Assy

Barrier Assy

Turn to the maximum

Turn to the maximum

Note
For removing the Ornamental Ring A 
and the Barrier Assy, refer to "1-6. 
ORNAMENTAL RING A OR BARRIER 
ASSY REPLACING METHOD."

Note

Once the 3 Assy Spring is removed, it 

is likely to come off the spring 

insertion hole. In that case, do not 

reuse the 3 Assy Spring.

For removing the Ornamental Ring A, Barrier Assy, and 1 Lens Assy, refer to "1-6. ORNAMENTAL RING A OR BARRIER
ASSY REPLACING METHOD."