Read Sony DSC-H300 (serv.man2) Service Manual online
DSC-H300_ADJ
5-4
5-3. CAMERA SECTION ADJUSTMENTS
5-3-1. Writing Lens data
Introduction:
- Please handle lens with care.
- Perform the operation additionally when replacing Main board or Lens.
- Read and record the lens data on the QR Code Label or Lens data Label attached to the lens. (Fig. 5-3-1)
- Record of numbers. (7 digit)
- Please handle lens with care.
- Perform the operation additionally when replacing Main board or Lens.
- Read and record the lens data on the QR Code Label or Lens data Label attached to the lens. (Fig. 5-3-1)
- Record of numbers. (7 digit)
010 1118
Lens data
0 1 0 111 8
(Fig.
5-3-1)
Preparations:
Put the folder “Wrirte_Lens Data” downloaded in “5-1-5. Setting the Adjustment Mode” (Page 5-3) on any place of the PC.
Confirm that includes the following items.
• Write_LensCode_v[][][].exe
• UI43Api.dll
• Write_LensCode_v[][][].exe
• UI43Api.dll
The USB Driver is sane as “5-3-12. Set Language Destination”.
Procedure:
1) Check that the camera is on the adjustment mode.
1) Check that the camera is on the adjustment mode.
Connect the camera and the PC.
2) Double click the “Write_LensCode_v[][][].exe” to start up the writing tool. (Fig. 5-3-2)
(Fig.
5-3-2)
3) Enter the recorded lens data in the “Data code” text field.
4) Click the “Write” button.
5) The message “Write Code To Camera OK !!” will be displayed.
4) Click the “Write” button.
5) The message “Write Code To Camera OK !!” will be displayed.
(Fig.
5-3-3)
5-3-2. Setting Default Gyro Value
Perform the this operation additionally when replacing Main board or Lens.
Preparations:
Put the folder “Set_Default Gyro Value” downloaded in “5-1-5. Setting the Adjustment Mode” (Page 5-3) on any place of the PC.
Confirm that includes the following items.
• Set_DefaultGyro_v[][][].exe
• UI43Api.dll
• Set_DefaultGyro_v[][][].exe
• UI43Api.dll
The USB Driver is sane as “5-3-12. Set Language Destination”.
Procedure:
1) Check that the camera is on the adjustment mode.
1) Check that the camera is on the adjustment mode.
Connect the camera and the PC.
2) Double click the “Set_DefaultGyro_v[][][].exe” to start up the writing tool. (Fig. 5-3-4)
3) Click the “Set Default ” button.
3) Click the “Set Default ” button.
(Fig.
5-3-4)
4) In case of the setting is finished normally, the setting completion indication appears on the screen. (Fig. 5-3-5)
The power of the camera turns off automatically.
(Fig.
5-3-5)
Click on the first or last page to see other DSC-H300 (serv.man2) service manuals if exist.