Read Sony DSC-H300 (serv.man2) Service Manual online
DSC-H300_ADJ
5-9
Adjustment order
Screen display
The adjustment is finished normally.
Success
OK
Angle:3.3 deg.
AF Luma:1119
AF Luma:1119
Fig. 5-3-28
The adjustment is complete.
The adjustment is finished abnormally.
Success
NG
Angle:7.0 deg.
AF Luma:2269
AF Luma:2269
Fig. 5-3-29
Malfunction of Flash WB
adjustment
adjustment
The Flash WB Adjustment order is as follows.
Note:
Perform the Flash WB Adjustment after those performed in 5-3-4 to 5-3-9.
Perform the Flash WB Adjustment after those performed in 5-3-4 to 5-3-9.
Confirm the indication
on the screen.
In case of the adjustment is finished abnormally,
the following indication appears on the screen.
(Fig. 5-3-29)
In this case, confirm the adjusting environment
and readjust.
the following indication appears on the screen.
(Fig. 5-3-29)
In this case, confirm the adjusting environment
and readjust.
n
Press the Control button “ b ” “ B ” and “ v ” “ V ” to change selected item. Choose “FLASH WB”,
press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.
* If the adjustment is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the adjustment. (Page 5-3)
press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.
* If the adjustment is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the adjustment. (Page 5-3)
In case of the adjustment is finished normally,
the adjustment completion indication appears
on the screen. (Fig. 5-3-28)
Press the “ (Playback)” button to return to
adjustment menu.
the adjustment completion indication appears
on the screen. (Fig. 5-3-28)
Press the “ (Playback)” button to return to
adjustment menu.
Check that the camera is on the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).
Place the camera in front of the Flash Adjustment Box. (Fig. 5-3-27)
Finished normally.
Finished abnormally.
5-3-11. Lens Option
Lens Option Setting order is as follows.
1) Check that the camera is on the adjustment mode.
Note:
For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).
2) Press the Control button “ b ” “ B ” and “ v ” “ V ”to change selected item. Choose “Lens Option”,
press the “
(Playback)” button to choose item.
Note:
If the setting is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the setting. (Page 5-3)
3) Press the Control button “ V ” to “Enable LDC” item after press the Control button “ B ” to set enable (00001).
Press the Control button “ V ” to “Enable LSC” item after press the Control button “ B ” to set enable (00001).
Press the Control button “ V ” to “Enable OIS” item after press the Control button “ z ” to set enable (00002).
Press the Control button “ V ” to “Enable OIS” item after press the Control button “ z ” to set enable (00002).
Final Press the “
(Playback)” button to return to adjustment mode, then press the Control button “ z ”,
select “OK” and press the Control button “ z ” to start.
Note:
LDC : Lens Distortion Correction
LSC : Lens Shading Correction
OIS : Optical Image Stabilizer
4) Confirm the indication on the screen.
When the setting is finished, the setting completion indication appears on the screen. (Fig. 5-3-30)
Press the “
Press the “
(Playback)” button to return to adjustment menu.
LDC
ON
LSC
ON
OIS
ON
Fig.
5-3-30
Click on the first or last page to see other DSC-H300 (serv.man2) service manuals if exist.