Read Sony DSC-H100 Service Manual online
DSC-H100
2-5
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
2-1-3. LENS SECTION
ns: not supplied
101
4-447-142-01 BASE
PLATE,
TRIPOD
102
4-447-141-01 METAL
PLATE,
TRIPOD
103
A-1906-105-A LENS BLOCK ASSY (Note
3
, 5)
104
4-447-163-01
TAPE, LENS CUSHION (A)
105
4-447-160-01 DAMPER,
LENS
106
4-447-161-01
OPTICAL FILTER BLOCK (Note 2)
107
4-447-162-01
FILTER MASK (Note 7)
108
Selection Parts LENS L TYPE WASHER (Note 1)
109
A-1906-101-A CCD BLOCK ASSY (Note 3)
110
4-447-207-01 SHEET,
LPF
111
Selection Parts LENS O WASHER (Note 1, 3)
112
2-649-300-01
SHEET, ADHESIVE (Note 4)
113
4-452-069-01
TAPE, LENS CUSHION (B) (Note 6)
114
4-452-933-01
CCD RUBBER 0.5MM
(Note 3)
#S3
4-447-230-01 SCREW,
M1.7X3
#S4
4-447-226-01 SCREW,
TP1.4X3.5
SVR
#S5
4-447-222-01 SCREW,
TP1.7X4.45
SVR
DISASSEMBLY
1. Remove in numerical order (
1
to
3
) in the left figure.
2
#S3 X 2
Bottom View
#S3
Note
Note 1: The lens L type washer differ in thickness. Make sure to return
the removed lens L type washer to original places.
Note 2: Refer to “Assembly-3: How to distinguish the side of Optical
Filter Block facing to Lens Device.”.
2
101
1
102
3
103
105
106
(Note 2)
110
107
114
(Note 3)
112
(Note 4)
109
(Note 3)
108
(Note 1)
111
(Note 1, 3)
111
(Note 1, 3)
113
(Note 6)
104
(Note 7)
(Note
3,
5)
#S3
#S5
ns
ns
#S4
Front Cover Section
(See page 2-6)
(Claw)
3
#S5 X 3
#S5
Back View
SELECTION PARTS
Ref. No.108
Select the optimum thickness of washer.
4-447-203-01 LENS L TYPE WASHER 0.05 (t=0.05)
4-447-204-01 LENS L TYPE WASHER 0.1 (t=0.1)
4-447-205-01 LENS L TYPE WASHER 0.15 (t=0.15)
4-447-206-01 LENS L TYPE WASHER 0.2 (t=0.2)
4-447-204-01 LENS L TYPE WASHER 0.1 (t=0.1)
4-447-205-01 LENS L TYPE WASHER 0.15 (t=0.15)
4-447-206-01 LENS L TYPE WASHER 0.2 (t=0.2)
Ref. No.111
Select the optimum thickness of washer.
4-447-208-01 LENS O WASHER 0.05 (t=0.05)
4-447-209-01 LENS O WASHER 0.1 (t=0.1)
4-447-211-01 LENS O WASHER 0.15 (t=0.15)
4-447-212-01 LENS O WASHER 0.2 (t=0.2)
4-447-209-01 LENS O WASHER 0.1 (t=0.1)
4-447-211-01 LENS O WASHER 0.15 (t=0.15)
4-447-212-01 LENS O WASHER 0.2 (t=0.2)
Note 3: When the Lens O Washers are removed, be sure to install
them at their original positions during reassembly.
When the Lens Block Assy is replaced, select CCD Rubber
0.5mm, Lens L Washers and Lens O Washers according to
“1-4. PRECAUTION ON REPLACING THE LENS BLOCK
ASSY.”
0.5mm, Lens L Washers and Lens O Washers according to
“1-4. PRECAUTION ON REPLACING THE LENS BLOCK
ASSY.”
Note 4: Cut SHEET, ADHESIVE (2-649-300-01) into
the desired length and use it.
7mm
10mm
23mm
15mm
8mm
Note 6: Refer to “Assembly-4: Lens Cushion Tape (B) putting posi-
tion.”.
Very weak
Very weak
Very weak
Note 5:
Do not hold the following part.
PRECAUTIONS WHEN HOLDING THE LENS BLOCK
Note 7: Refer to “Assembly-5: Lens Cushion Tape (A) putting posi-
tion.”.
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.0 are shown in blue.
Ver. 1.1 2012.10
Click on the first or last page to see other DSC-H100 service manuals if exist.