Read Sony DSC-H100 / DSC-H200 (serv.man2) Service Manual online
DSC-H100/H200_ADJ
5-9
Adjustment order
Screen display
The adjustment is finished normally.
Succes
OK
Angle:3.3 deg.
AF Luma:0962
AF Luma:0962
Fig. 5-3-32
The adjustment is complete.
The adjustment is finished abnormally.
Success
NG
Angle:3.3 deg.
AF Luma:1169
AF Luma:1169
Fig. 5-3-33
Malfunction of Flash WB
adjustment
adjustment
The Flash WB Adjustment order is as follows.
Note:
Perform the Flash WB Adjustment after those performed in 5-3-4 to 5-3-5.
Perform the Flash WB Adjustment after those performed in 5-3-4 to 5-3-5.
Confirm the indication
on the screen.
In case of the adjustment is finished abnormally,
the following indication appears on the screen.
(Fig. 5-3-33)
In this case, confirm the adjusting environment
and readjust.
the following indication appears on the screen.
(Fig. 5-3-33)
In this case, confirm the adjusting environment
and readjust.
n
Press the Control button “ b ” “ B ” and “ v ” “ V ” to change selected item. Choose “FLASH WB”,
press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.
* If the adjustment is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the adjustment. (Page 5-3)
press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.
* If the adjustment is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the adjustment. (Page 5-3)
In case of the adjustment is finished normally,
the adjustment completion indication appears
on the screen. (Fig. 5-3-32)
Press the “ (Playback)” button to return to
adjustment menu.
the adjustment completion indication appears
on the screen. (Fig. 5-3-32)
Press the “ (Playback)” button to return to
adjustment menu.
Check that the camera is on the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).
Place the camera in front of the Flash Adjustment Box. (Fig. 5-3-31)
Finished normally.
Finished abnormally.
5-3-11. AF Lamp Check
The AF Lamp check order is as follows.
Setting conditions
• Project images on a dark wall surface.
• Distance between wall surface and camera = approx. 1 m
• The wall surface and the camera are face to face.
• Distance between wall surface and camera = approx. 1 m
• The wall surface and the camera are face to face.
1) Check that the camera is on the adjustment mode.
Note:
For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the
Adjustment Mode” (Page 5-3).
Adjustment Mode” (Page 5-3).
Equipment required:
Wall surface
Approx.
1 m
Camera
Project images on
a dark wall surface
a dark wall surface
Fig. 5-3-34
2) Place the camera in front of a dark wall surface face to face.
3) Press the Control button “ b ” “ B ” and “ ▲ ” “ ▼ ” to change selected item. Choose “AFLAMP”, press the Control button “ z ”, select “OK”,
and press the Control button “ z ” to start.
Note:
If the check is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the check. (Page 5-3)
A guide frame is displayed on the LCD screen and the AF lamp lights.
Manipulate the camera so that the auxiliary light on the wall surface comes to the center of the guide frame.
5-3-12. Lens Option
Lens Option Setting order is as follows.
1) Check that the camera is on the adjustment mode.
Note:
For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).
2) Press the Control button “ b ” “ B ” and “ v ” “ V ”to change selected item. Choose “Lens Option”,
press the “
(Playback)” button to choose item.
Note:
If the setting is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the setting. (Page 5-3)
3) Press the Control button “ V ” to “Enable LDC” item after press the Control button “ B ” to set enable (00001).
Press the Control button “ V ” to “Enable LSC” item after press the Control button “ B ” to set enable (00001).
Press the Control button “ V ” to “Enable OIS” item after press the Control button “ z ” to set enable (00002).
Press the Control button “ V ” to “Enable OIS” item after press the Control button “ z ” to set enable (00002).
Final Press the “
(Playback)” button to return to adjustment mode, then press the Control button “ z ”,
select “OK” and press the Control button “ z ” to start.
Note:
LDC : Lens Distortion Correction
LSC : Lens Shading Correction
OIS : Optical Image Stabilizer
4) Confirm the indication on the screen.
When the setting is finished, the setting completion indication appears on the screen. (Fig. 5-3-37)
Press the “
Press the “
(Playback)” button to return to adjustment menu.
LDC
ON
LSC
ON
OIS
ON
Fig.
5-3-37
4) Confirm the indication on the screen.
If OK appears for all check items, press the “
(Playback)” button
to return to adjustment menu. (Fig. 5-3-35)
OK
Angle:3.3 deg.
AF Luma:0485
AF Luma:0485
Fig. 5-3-35
If NG appears for more than one check item, confirm the adjusting
environment and recheck. (Fig. 5-3-36)
environment and recheck. (Fig. 5-3-36)
NG
Fig. 5-3-36
Click on the first or last page to see other DSC-H100 / DSC-H200 (serv.man2) service manuals if exist.