Read Sony DSC-G1 (serv.man4) Service Manual online
6-2
DSC-G1_ADJ
Replaced parts
Block
Mounted parts
Board
replacement
replacement
replacement
Adjusting item
Adjustment
LCD unit
(AF illumination LED)
(Timing gen., CCD signal process)
(Video amp.)
(NAND flash) (Note 2)
(Wireless LAN module)
(PITCH, YAW sensor)
LCD901
D002
IC201
IC702
IC502
CP801
SE601, SE602
(COMPLETE)
(COMPLETE) (Note 2, 3)
Lens block
CCD block assy (Including CD-641 flexible board and CCD imager)
Flash unit
LCD block
ST-147 board
SY-153 board
SY-153 board
SY-153 board
SY-153 board
SY-153 board
ST-147 board
SY-153 board
Destination Data Write
Destination data write
z
z
USB Serial No. Input
USB serial No. input
z
VIDEO adjustment
Video output level adj.
z
z
CAMERA adjustment 1
Hall adj.
z
z
(Note 1)
Wide limit adj.
z
z
CAMERA adjustment 2
Flange back adj.
z
z
z
CAMERA adjustment 3
Flange back check
z
z
z
F No. compensation
Measure gain, LV adj.
Mechanical shutter adj.
AWB 3200K-5800K standard data input
AWB 3200K-5800K check
Color reproduction adj. & check
CCD linearity check
CCD white defect compensation check
CCD black defect compensation check
CAMERA adjustment 5
Strobe adj.
z
z
z
z
z
CAMERA adjustment 6
Auto focus illumination check
z
z
z
CAMERA adjustment 7
Angular velocity sensor sensitivity adj.
z
z
z
V-COM adj.
White Balance adj.
LCD adjustment
z
z
z
CAMERA adjustment 4
z
z
z
1-1. Adjusting items when replacing main parts and boards
When replacing main parts and boards, adjust the items indicated by z in the following table.
Note 1: The automatic Adjustment Program does not support the “Wide Limit Adjustment”. Perform it manually.
Note 2: When replacing the SY-153 board, erase the data in internal memory of the board before replacement.
Note 3: When replacing the SY-153 board or the IC502 on the SY-153 board, execute formatting and initialize the internal memory after
Note 1: The automatic Adjustment Program does not support the “Wide Limit Adjustment”. Perform it manually.
Note 2: When replacing the SY-153 board, erase the data in internal memory of the board before replacement.
Note 3: When replacing the SY-153 board or the IC502 on the SY-153 board, execute formatting and initialize the internal memory after
replacement.
Table 6-1-1
Click on the first or last page to see other DSC-G1 (serv.man4) service manuals if exist.