DSC-G1 (serv.man4) - Sony Digital Camera Service Manual (repair manual). Page 3

6-1

DSC-G1_ADJ

The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the
internal memory.)

Note 1: When replacing the SY-153 board, erase the data in internal memory of the board before replacement.
Note 2: When replacing the SY-153 board or the IC502 on the SY-153 board, execute formatting and initialize the

internal memory after replacement.

Erases (initializes) all the data in the internal memory completely. [Format] may not erase the 
data in the internal memory. [Fully Format] is recommended when you discard or transfer the 
camera.

• Use a fully charged battery pack or the AC Adaptor with the camera installed on the Cyber-shot Station.
• Note that formatting irrevocably erases all data in the internal memory, including even protected images.

1

Select [Fully Format] with the control button, then press z.
The message “All data in internal memory will be erased” appears.

2

Select [OK], then press z.
The format is complete.

Select [Cancel] in step 2, then press z.

• It  may  take several minutes to do this operation.

Copies the images stored in the “Memory Stick Duo” to an album (Import) and copies the 
Album Images to the “Memory Stick Duo” (Export).

• If its image size is over 6 M, you cannot view the image on the camera, which was copied to the camera. 

You can resize images using the “Album Editor”.

• When an Original Image is stored, the Original Image is exported, and when not stored, its Album Image 

is exported.

 (Import: Multiple 

Images)

Selects images and copies the images from the “Memory Stick 
Duo” to the internal memory.

 (Import: This Image)

Copies the image that is currently selected from the “Memory 
Stick Duo” to the internal memory.

 (Export: Multiple 

Images)

Selects images and copies the images from the internal memory 
to the “Memory Stick Duo”.

 (Export: This Image)

Copies the image that is currently selected from the internal 
memory to the “Memory Stick Duo”

1

Select [

] (Import: Multiple Images) or [

] (Export: Multiple Images) with the control 

button, then press z.

2

Select the images. 

3

Press MENU to display the menu.

4

Select [OK], then press z.
The selected images are copied.

1

Select the image.

2

Select [

] (Import: This Image) or [

] (Export: This Image) with the control button, then 

press z.
The image is copied.