Read Sony XSP-N1BT Service Manual online
61
XSP-N1BT
6-4. CHASSIS BOTTOM SECTION
151
3-042-244-11 SCREW
(T)
152
4-548-823-01 SHEET
HEAT
TRANSFER
153
4-410-504-01 SCREW (+PTT 2.6X6), GROUND POINT
154
A-2038-966-A MAIN BOARD, COMPLETE (US, CND) (See Note 2)
154
A-2038-967-A MAIN BOARD, COMPLETE (Except US, CND)
(See Note 2)
BT1
1-754-894-21 BT,
ANTENNA
FFC1
1-846-819-31 CABLE FLEXIBLE FLAT (27 CORE)
(Length: 150 mm) (See Note 3)
FFC1
1-846-819-41 CABLE FLEXIBLE FLAT (27 CORE)
(Length: 80 mm) (See Note 3)
TU01
A-1946-531-A TUX-DSP03 (TUNER UNIT)
#1
7-685-792-09 SCREW +PTT 2.6X6 (S)
#2
7-685-790-01 SCREW +PTT 2.6X4 (S)
#3
7-685-793-01 SCREW +PTT 2.6X8 (S)
#4
7-685-134-19 SCREW +P 2.6X8 TYPE2 NON-SLIT
#5
7-685-794-01 SCREW +PTT 2.6X10 (S)
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
(US, CND)
#5
#3
#3
#5
#5
#1
#1
#5
#4
#4
#4
MAIN board
TU01
FFC1
153
153
154
not supplied
not supplied
not supplied
not supplied
152
152
151
BT1
D
D
E
#2
CD mechanism deck section
(MG-101CF-188)
(MG-101CF-188)
#2
Note 1: The service manual of the mechanism deck, used in this model
has been issued in a separate volume. Please refer to the service
manual of the MG-101 series for the mechanism deck information.
manual of the MG-101 series for the mechanism deck information.
Note 2: When the complete MAIN board is replaced, it is necessary to replace cover but-
ton SV assy simultaneously. Also, the destination setting, Bluetooth operation
check and Bluetooth information writing is necessary. Refer to “DESTINATION
SETTING METHOD” on page 4, “BLUETOOTH FUNCTION CHECKING
METHOD USING A CELLULAR PHONE” on page 7 and “BLUETOOTH
INFORMATION WRITING METHOD” on page 8.
check and Bluetooth information writing is necessary. Refer to “DESTINATION
SETTING METHOD” on page 4, “BLUETOOTH FUNCTION CHECKING
METHOD USING A CELLULAR PHONE” on page 7 and “BLUETOOTH
INFORMATION WRITING METHOD” on page 8.
Ver. 1.2
Note 3: The length of cable fl exible fl at (27 core) has been
changed from 150 mm to 80 mm in the midway of
production. When replacing the part of Ref. No.
FFC1, use the part of the same length as before re-
placing.
production. When replacing the part of Ref. No.
FFC1, use the part of the same length as before re-
placing.
Click on the first or last page to see other XSP-N1BT service manuals if exist.