Read Sony XSP-N1BT Service Manual online
XSP-N1BT
27
3-5. LCD BOARD
4 two screws
(B P-TITE M2)
4 two screws
(B P-TITE M2)
1 filament tape
(sub
material)
1 filament tape
(sub
material)
LCD board
2 Remove the solder.
[red]
[red]
2 Remove the solder.
[black]
[black]
Insert two wires in the
hole of the LCD board.
hole of the LCD board.
7 button eject
3 flexible flat cable (10 core)
(CN903)
flexible flat cable
(CN903)
(CN903)
6 cover cable
8 LCD board
LCD board
20 mm
– Panel front block rear bottom view –
Wire setting
Note 1: Wires must not overlap
on the lever detect P.
Note 3: The filament tape must
not overlap on the hole
of LCD board.
Note 2: Bend wires at 90 degrees.
Note 4: This portion must not be
fixed on the filament tape.
filament tape (sub material)
Note 5: When installing the flexible flat cable, ensure that the
colored line is not slanted after insertion.
colored line
Insert is straight to the interior.
flexible flat
cable
cable
connector
OK
colored line
Insert is incline.
flexible flat
cable
cable
connector
NG
5 Remove the LCD board in
the direction of the arrow.
filament tape
(sub material)
(sub material)
Flexible flat cable setting
Click on the first or last page to see other XSP-N1BT service manuals if exist.