Read Sony XR-CA624X Service Manual online
7
XR-CA624X
182 mm
53 mm
4
A
Precautions
•Choose the installation location carefully so
that the unit will not interfere with normal
driving operations.
driving operations.
•Avoid installing the unit in areas subject to
dust, dirt, excessive vibration, or high
temperatures, such as in direct sunlight or near
heater ducts.
temperatures, such as in direct sunlight or near
heater ducts.
•Use only the supplied mounting hardware for
a safe and secure installation.
•
There must be a distance of at least 15 cm between
the cassette slot of the unit and shift lever in order
to insert a cassette easily. Choose the installation
location carefully so the unit does not interfere
with gear shifting and other driving operations.
the cassette slot of the unit and shift lever in order
to insert a cassette easily. Choose the installation
location carefully so the unit does not interfere
with gear shifting and other driving operations.
15
cm
Mounting angle adjustment
Adjust the mounting angle to less than 20°.
How to detach and attach the
front panel (
front panel (
4)
Before installing the unit, detach the front
panel.
panel.
4-ATo detach
Before detaching the front panel, be sure to
press
press
(OFF). Press (OPEN), then slide the front
panel to the right side, and pull out the left side.
4-B To attach
Place the hole
in the front panel onto the
spindle on the unit as illustrated, then push
the left side in.
the left side in.
B
Mounting example (
5)
Installation in the dashboard
Mounting the unit in a Japanese
car (
car (
6)
You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult
your Sony dealer.
makes of Japanese cars. In such a case, consult
your Sony dealer.
Note
To prevent malfunction, install only with the
supplied screws
To prevent malfunction, install only with the
supplied screws
4.
Warning when installing in a car
without ACC (accessory)
position on the ignition key
switch
without ACC (accessory)
position on the ignition key
switch
Be sure to press
(OFF) on the unit for two
seconds to turn off the clock display after
turning off the engine.
turning off the engine.
When you press
(OFF) only momentarily, the
clock display does not turn off and this causes
battery wear.
battery wear.
RESET button
When the installation and connections are
completed, be sure to press the RESET button
with a ballpoint pen, etc.
completed, be sure to press the RESET button
with a ballpoint pen, etc.
1
2
3
Bend these claws outward
for a tight fit, if necessary.
for a tight fit, if necessary.
若有必要，則可彎曲這些卡爪。
#####
#####
2
6
4
4
5
5
4
4
1
1
Fire wall
防火壁
#####
#####
Dashboard
儀表板
#####
#####
5
5
c
使用前注意事項
• 仔細選擇安裝位置，使之不妨礙正常的駕駛操作。
• 避免將本機放在高溫之處，如陽光直接照射、暖
• 避免將本機放在高溫之處，如陽光直接照射、暖
氣機前、或灰塵極多、髒亂，以及極易受震動等
地方。
地方。
• 為使安裝得以安全和可靠，祇能使用提供的安裝
零件。
•在本機的卡帶槽口和變速桿之間，至少需保持
15 cm 距離以便於裝插卡帶。請留心選擇安裝位
置以便使機器不至於妨礙您排檔和其他駕車操
作。
置以便使機器不至於妨礙您排檔和其他駕車操
作。
15
cm
安裝角度之調整
請在 20 °以內調整安裝角度。
如何拆卸和裝配前面板（4）
安裝本機之前，請先拆卸前面板。
4-A 拆卸
拆卸前面板之前，須先按下 (OFF) 鍵。然後，按
下 (OPEN) 鍵以便開啟前面板，將前面板稍微向
右邊滑動，然後將前面板的左側拉出。
下 (OPEN) 鍵以便開啟前面板，將前面板稍微向
右邊滑動，然後將前面板的左側拉出。
4-B 裝配
如圖所示，將前面板的
孔搭在本機的支軸
上，然後推入左側。
安裝示例（5）
安裝在儀錶板裡
將本機安裝於日本產汽車上時
（6）
（6）
有的日本產汽車不能安裝本機，在這種情形下，請
您向當地的 Sony 經銷商諮詢。
您向當地的 Sony 經銷商諮詢。
註
為防止發生故障，安裝時只能使用附送的螺絲 4。
為防止發生故障，安裝時只能使用附送的螺絲 4。
安裝在點火鑰匙開關上沒有 ACC
（輔助）位置的汽車上時的警告
（輔助）位置的汽車上時的警告
在關掉汽車引擎之後，一定請按下機器上的
(OFF) 兩秒以關掉時鐘顯示。
如果只短暫地按一下 (OFF)，將不會關掉時鐘顯
示而浪費電池。
示而浪費電池。
RESET 按鈕
當安裝和連接完成後，務請用圓珠筆等按壓 RESET
按鈕。
按鈕。
3
Click on the first or last page to see other XR-CA624X service manuals if exist.