Read Sony XR-CA624X Service Manual online
8
XR-CA624X
6
A
to dashboard/center console
至儀表板 中央控制箱
################
################
Bracket
托架
########
########
Bracket
托架
#########
#########
max. size
5
5
×
8 mm
最大尺寸
5×8 mm
#########
#########
5×8 mm
#########
#########
B
4
max. size
5
5
×
8 mm
最大尺寸
5×8 mm
#######
########
5×8 mm
#######
########
TOYOTA
NISSAN
4
to dashboard/center console
至儀表板 中央控制箱
#################
#################
Bracket
托架
#######
#######
Bracket
托架
######
######
4
Existing parts supplied with your car
隨汽車附送的部件
##########################################
##########################################
Existing parts supplied with your car
隨汽車附送的部件
#########################
#########################
max. size
5
5
×
8 mm
最大尺寸
5×8 mm
#######
##########
5×8 mm
#######
##########
max. size
5
5
×
8 mm
最大尺寸
5×8 mm
##########
#####
5×8 mm
##########
#####
4
Precautions
•Choose the installation location carefully so
that the unit will not interfere with normal
driving operations.
driving operations.
•Avoid installing the unit in areas subject to
dust, dirt, excessive vibration, or high
temperatures, such as in direct sunlight or near
heater ducts.
temperatures, such as in direct sunlight or near
heater ducts.
•Use only the supplied mounting hardware for
a safe and secure installation.
•
There must be a distance of at least 15 cm between
the cassette slot of the unit and shift lever in order
to insert a cassette easily. Choose the installation
location carefully so the unit does not interfere
with gear shifting and other driving operations.
the cassette slot of the unit and shift lever in order
to insert a cassette easily. Choose the installation
location carefully so the unit does not interfere
with gear shifting and other driving operations.
15
cm
Mounting angle adjustment
Adjust the mounting angle to less than 20°.
How to detach and attach the
front panel (
front panel (
4)
Before installing the unit, detach the front
panel.
panel.
4-ATo detach
Before detaching the front panel, be sure to
press
press
(OFF). Press (OPEN), then slide the front
panel to the right side, and pull out the left side.
4-B To attach
Place the hole
in the front panel onto the
spindle on the unit as illustrated, then push
the left side in.
the left side in.
Mounting example (
5)
Installation in the dashboard
Mounting the unit in a Japanese
car (
car (
6)
You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult
your Sony dealer.
makes of Japanese cars. In such a case, consult
your Sony dealer.
Note
To prevent malfunction, install only with the
supplied screws
To prevent malfunction, install only with the
supplied screws
4.
Warning when installing in a car
without ACC (accessory)
position on the ignition key
switch
without ACC (accessory)
position on the ignition key
switch
Be sure to press
(OFF) on the unit for two
seconds to turn off the clock display after
turning off the engine.
turning off the engine.
When you press
(OFF) only momentarily, the
clock display does not turn off and this causes
battery wear.
battery wear.
RESET button
When the installation and connections are
completed, be sure to press the RESET button
with a ballpoint pen, etc.
completed, be sure to press the RESET button
with a ballpoint pen, etc.
Click on the first or last page to see other XR-CA624X service manuals if exist.